Apologies for this Peter. HP is actively working this issue. On Tue, May 10, 2011 at 10:42 AM, Albert Chu <[email protected]> wrote:
> Hi Peter, > > Unfortunately, HP has not revealed how to interpret these OEM sensors. > Until they do, there's not much I can do. Perhaps you can ping your HP > support and see if someone can cough some information up? > > Al > > On Mon, 2011-05-09 at 06:35 -0700, Reu Peter wrote: > > Hello, > > > > some OEM Sensors can't be read. > > > > Hardware: HP DL360 G6 > > > > > > bmc-info > > > > Device ID : 17 > > Device Revision : 1 > > Device SDRs : supported > > Firmware Revision : 2.05 > > Device Available : yes (normal operation) > > IPMI Version : 2.0 > > Sensor Device : supported > > SDR Repository Device : supported > > SEL Device : supported > > FRU Inventory Device : supported > > IPMB Event Receiver : unsupported > > IPMB Event Generator : unsupported > > Bridge : unsupported > > Chassis Device : unsupported > > Manufacturer ID : Hewlett-Packard (11) > > Product ID : 8192 > > > > Channel Information > > > > Channel Number : 2 > > Medium Type : 802.3 LAN > > Protocol Type : IPMB-1.0 > > Active Session Count : 0 > > Session Support : multi-session > > Vendor ID : Intelligent Platform Management Interface forum > > (7154) > > > > Channel Number : 7 > > Medium Type : OEM > > Protocol Type : KCS > > Active Session Count : 0 > > Session Support : session-less > > Vendor ID : Intelligent Platform Management Interface forum > > (7154) > > > > > > pmi-sensors -V > > > > ipmi-sensors - 1.0.4 > > Copyright (C) 2003-2010 FreeIPMI Core Team > > This program is free software; you may redistribute it under the terms > > of > > the GNU General Public License. This program has absolutely no > > warranty. > > ipmi-sensors --flush-cache > > > > ipmi-sensors --interpret-oem-data --output-sensor-state > > > > ID | Name | Type | State | Reading | Units | > > Event > > 1 | VRM 1 | Power Unit | Nominal | N/A | N/A | > > 'Device Inserted/Device Present' > > 2 | VRM 2 | Power Unit | Nominal | N/A | N/A | > > 'Device Inserted/Device Present' > > 3 | UID Light | OEM Reserved | N/A | N/A | N/A | > > 'OEM Event = 0000h' > > 4 | Int. Health LED | OEM Reserved | N/A | N/A | N/A | > > 'OEM Event = 0000h' > > 5 | Ext. Health LED | OEM Reserved | N/A | N/A | N/A | > > 'OEM Event = 0000h' > > 6 | Power Supply 1 | Power Supply | Nominal | N/A | N/A | > > 'Presence detected' > > 7 | Power Supply 2 | Power Supply | Nominal | N/A | N/A | > > 'Presence detected' > > 8 | Power Supplies | Power Supply | Nominal | N/A | N/A | > > 'Fully Redundant' > > 10 | Fan Block 1 | Fan | Nominal | N/A | N/A | > > 'transition to Running' > > 11 | Fan Block 2 | Fan | N/A | N/A | N/A | > > N/A > > 12 | Fan Block 3 | Fan | Nominal | N/A | N/A | > > 'transition to Running' > > 13 | Fan Block 4 | Fan | Nominal | N/A | N/A | > > 'transition to Running' > > 14 | Fans | Fan | Nominal | N/A | N/A | > > 'Fully Redundant' > > 16 | Temp 1 | Temperature | Nominal | 18.00 | C | > > 'OK' > > 17 | Temp 2 | Temperature | Nominal | 40.00 | C | > > 'OK' > > 18 | Temp 3 | Temperature | N/A | N/A | C | > > N/A > > 19 | Temp 4 | Temperature | Nominal | 29.00 | C | > > 'OK' > > 20 | Temp 5 | Temperature | Nominal | 31.00 | C | > > 'OK' > > 21 | Temp 6 | Temperature | Nominal | 29.00 | C | > > 'OK' > > 22 | Temp 7 | Temperature | Nominal | 30.00 | C | > > 'OK' > > 23 | Temp 8 | Temperature | N/A | N/A | C | > > N/A > > 24 | Temp 9 | Temperature | Nominal | 28.00 | C | > > 'OK' > > 25 | Temp 10 | Temperature | N/A | N/A | C | > > N/A > > 26 | Temp 11 | Temperature | Nominal | 28.00 | C | > > 'OK' > > 27 | Temp 12 | Temperature | Nominal | 30.00 | C | > > 'OK' > > 28 | Temp 13 | Temperature | Nominal | 46.00 | C | > > 'OK' > > 29 | Temp 14 | Temperature | Nominal | 26.00 | C | > > 'OK' > > 30 | Temp 15 | Temperature | Nominal | 29.00 | C | > > 'OK' > > 31 | Temp 16 | Temperature | Nominal | 31.00 | C | > > 'OK' > > 32 | Temp 17 | Temperature | Nominal | 25.00 | C | > > 'OK' > > 33 | Temp 18 | Temperature | Nominal | 37.00 | C | > > 'OK' > > 34 | Temp 19 | Temperature | Nominal | 33.00 | C | > > 'OK' > > 35 | Temp 20 | Temperature | Nominal | 35.00 | C | > > 'OK' > > 36 | Temp 21 | Temperature | Nominal | 41.00 | C | > > 'OK' > > 37 | Temp 22 | Temperature | Nominal | 38.00 | C | > > 'OK' > > 38 | Temp 23 | Temperature | Nominal | 39.00 | C | > > 'OK' > > 39 | Temp 24 | Temperature | Nominal | 45.00 | C | > > 'OK' > > 40 | Temp 25 | Temperature | Nominal | 34.00 | C | > > 'OK' > > 41 | Temp 26 | Temperature | Nominal | 45.00 | C | > > 'OK' > > 42 | Temp 27 | Temperature | Nominal | 25.00 | C | > > 'OK' > > 43 | Temp 28 | Temperature | Nominal | 71.00 | C | > > 'OK' > > 44 | Power Meter | Current | N/A | N/A | N/A | > > 'Device Enabled' > > 45 | Memory | Memory | Warning | N/A | N/A | > > 'Correctable memory error' > > > > > > ipmi-sensors --interpret-oem-data --output-sensor-state > > --ignore-not-available-sensors > > > > ID | Name | Type | State | Reading | Units | > > Event > > 1 | VRM 1 | Power Unit | Nominal | N/A | N/A | > > 'Device Inserted/Device Present' > > 2 | VRM 2 | Power Unit | Nominal | N/A | N/A | > > 'Device Inserted/Device Present' > > 3 | UID Light | OEM Reserved | N/A | N/A | N/A | > > 'OEM Event = 0000h' > > 4 | Int. Health LED | OEM Reserved | N/A | N/A | N/A | > > 'OEM Event = 0000h' > > 5 | Ext. Health LED | OEM Reserved | N/A | N/A | N/A | > > 'OEM Event = 0000h' > > 6 | Power Supply 1 | Power Supply | Nominal | N/A | N/A | > > 'Presence detected' > > 7 | Power Supply 2 | Power Supply | Nominal | N/A | N/A | > > 'Presence detected' > > 8 | Power Supplies | Power Supply | Nominal | N/A | N/A | > > 'Fully Redundant' > > 10 | Fan Block 1 | Fan | Nominal | N/A | N/A | > > 'transition to Running' > > 12 | Fan Block 3 | Fan | Nominal | N/A | N/A | > > 'transition to Running' > > 13 | Fan Block 4 | Fan | Nominal | N/A | N/A | > > 'transition to Running' > > 14 | Fans | Fan | Nominal | N/A | N/A | > > 'Fully Redundant' > > 16 | Temp 1 | Temperature | Nominal | 18.00 | C | > > 'OK' > > 17 | Temp 2 | Temperature | Nominal | 40.00 | C | > > 'OK' > > 19 | Temp 4 | Temperature | Nominal | 28.00 | C | > > 'OK' > > 20 | Temp 5 | Temperature | Nominal | 31.00 | C | > > 'OK' > > 21 | Temp 6 | Temperature | Nominal | 28.00 | C | > > 'OK' > > 22 | Temp 7 | Temperature | Nominal | 30.00 | C | > > 'OK' > > 24 | Temp 9 | Temperature | Nominal | 28.00 | C | > > 'OK' > > 26 | Temp 11 | Temperature | Nominal | 28.00 | C | > > 'OK' > > 27 | Temp 12 | Temperature | Nominal | 30.00 | C | > > 'OK' > > 28 | Temp 13 | Temperature | Nominal | 46.00 | C | > > 'OK' > > 29 | Temp 14 | Temperature | Nominal | 26.00 | C | > > 'OK' > > 30 | Temp 15 | Temperature | Nominal | 29.00 | C | > > 'OK' > > 31 | Temp 16 | Temperature | Nominal | 31.00 | C | > > 'OK' > > 32 | Temp 17 | Temperature | Nominal | 25.00 | C | > > 'OK' > > 33 | Temp 18 | Temperature | Nominal | 37.00 | C | > > 'OK' > > 34 | Temp 19 | Temperature | Nominal | 34.00 | C | > > 'OK' > > 35 | Temp 20 | Temperature | Nominal | 35.00 | C | > > 'OK' > > 36 | Temp 21 | Temperature | Nominal | 41.00 | C | > > 'OK' > > 37 | Temp 22 | Temperature | Nominal | 38.00 | C | > > 'OK' > > 38 | Temp 23 | Temperature | Nominal | 39.00 | C | > > 'OK' > > 39 | Temp 24 | Temperature | Nominal | 45.00 | C | > > 'OK' > > 40 | Temp 25 | Temperature | Nominal | 34.00 | C | > > 'OK' > > 41 | Temp 26 | Temperature | Nominal | 45.00 | C | > > 'OK' > > 42 | Temp 27 | Temperature | Nominal | 25.00 | C | > > 'OK' > > 43 | Temp 28 | Temperature | Nominal | 71.00 | C | > > 'OK' > > 44 | Power Meter | Current | N/A | N/A | N/A | > > 'Device Enabled' > > 45 | Memory | Memory | Warning | N/A | N/A | > > 'Correctable memory error' > > > > > > ipmi-sensors --interpret-oem-data --output-sensor-state -v > > --record-ids=1,2,3,4,5,6,7,8,9,10,11,12,13,14,44,45 > > > > Record ID: 1 > > ID String: VRM 1 > > Sensor Type: Power Unit (9h) > > Sensor Number: 1 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: processor module (9) > > Entity Instance: 1 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 8h > > Sensor State: Nominal > > Sensor Event: 'Device Inserted/Device Present' > > > > Record ID: 2 > > ID String: VRM 2 > > Sensor Type: Power Unit (9h) > > Sensor Number: 2 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: processor module (9) > > Entity Instance: 2 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 8h > > Sensor State: Nominal > > Sensor Event: 'Device Inserted/Device Present' > > > > Record ID: 3 > > ID String: UID Light > > Sensor Type: OEM Reserved (C0h) > > Sensor Number: 3 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system chassis (23) > > Entity Instance: 1 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 70h > > Sensor State: N/A > > Sensor Event: 'OEM Event = 0000h' > > > > Record ID: 4 > > ID String: Int. Health LED > > Sensor Type: OEM Reserved (C0h) > > Sensor Number: 4 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system chassis (23) > > Entity Instance: 2 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 71h > > Sensor State: N/A > > Sensor Event: 'OEM Event = 0000h' > > > > Record ID: 5 > > ID String: Ext. Health LED > > Sensor Type: OEM Reserved (C0h) > > Sensor Number: 5 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system chassis (23) > > Entity Instance: 3 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 71h > > Sensor State: N/A > > Sensor Event: 'OEM Event = 0000h' > > > > Record ID: 6 > > ID String: Power Supply 1 > > Sensor Type: Power Supply (8h) > > Sensor Number: 6 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: power supply (10) > > Entity Instance: 1 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 6Fh > > Sensor State: Nominal > > Sensor Event: 'Presence detected' > > > > Record ID: 7 > > ID String: Power Supply 2 > > Sensor Type: Power Supply (8h) > > Sensor Number: 7 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: power supply (10) > > Entity Instance: 2 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 6Fh > > Sensor State: Nominal > > Sensor Event: 'Presence detected' > > > > Record ID: 8 > > ID String: Power Supplies > > Sensor Type: Power Supply (8h) > > Sensor Number: 8 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: power supply (10) > > Entity Instance: 3 > > Entity Instance Type: Logical Container Entity > > Event/Reading Type Code: Bh > > Sensor State: Nominal > > Sensor Event: 'Fully Redundant (formerly "Redundancy Regained")' > > > > Record ID: 10 > > ID String: Fan Block 1 > > Sensor Type: Fan (4h) > > Sensor Number: 9 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system board (7) > > Entity Instance: 1 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: Ah > > Sensor State: Nominal > > Sensor Event: 'transition to Running' > > > > Record ID: 11 > > ID String: Fan Block 2 > > Sensor Type: Fan (4h) > > Sensor Number: 10 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system board (7) > > Entity Instance: 2 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: Ah > > Sensor State: N/A > > Sensor Event: N/A > > > > Record ID: 12 > > ID String: Fan Block 3 > > Sensor Type: Fan (4h) > > Sensor Number: 11 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system board (7) > > Entity Instance: 3 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: Ah > > Sensor State: Nominal > > Sensor Event: 'transition to Running' > > > > Record ID: 13 > > ID String: Fan Block 4 > > Sensor Type: Fan (4h) > > Sensor Number: 12 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system board (7) > > Entity Instance: 4 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: Ah > > Sensor State: Nominal > > Sensor Event: 'transition to Running' > > > > Record ID: 14 > > ID String: Fans > > Sensor Type: Fan (4h) > > Sensor Number: 13 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system board (7) > > Entity Instance: 5 > > Entity Instance Type: Logical Container Entity > > Event/Reading Type Code: Bh > > Sensor State: Nominal > > Sensor Event: 'Fully Redundant (formerly "Redundancy Regained")' > > > > Record ID: 44 > > ID String: Power Meter > > Sensor Type: Current (3h) > > Sensor Number: 42 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system board (7) > > Entity Instance: 7 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 9h > > Sensor State: N/A > > Sensor Event: 'Device Enabled' > > > > Record ID: 45 > > ID String: Memory > > Sensor Type: Memory (Ch) > > Sensor Number: 43 > > IPMB Slave Address: 10h > > Sensor Owner ID: 20h > > Sensor Owner LUN: 0h > > Channel Number: 0h > > Entity ID: system board (7) > > Entity Instance: 8 > > Entity Instance Type: Physical Entity > > Event/Reading Type Code: 6Fh > > Sensor State: Warning > > Sensor Event: 'Correctable ECC/other correctable memory error' > > > > > > > > Best regards! > > > > Peter Reu > > > > > > Bezirk Mittelfranken > > Referat 4 > > Bildung, Umwelt und IT > > Feuchtwanger Str. 38 > > 91522 Ansbach > > > > Tel.: +49 981 4664 - 1243 > > Fax: +49 981 4664 - 1289 > > Mail: [email protected] > > > > Diese E-Mail ist vertraulich. Wenn Sie nicht der rechtmässige > > Empfänger > > sind, düfen Sie den Inhalt weder kopieren, verbreiten noch benutzen. > > Sollten Sie diese E-Mail versehentlich erhalten haben, senden Sie > > diese bitte > > an mich zurück und löschen diese anschliessend. > > > > This E-Mail is confidential. If you are not the intended recipient, > > you must > > not copy, disclose or use its contents. If you have received it in > > error, > > please inform me immediately by return E-Mail and delete the document. > > > > > -- > Albert Chu > [email protected] > Computer Scientist > High Performance Systems Division > Lawrence Livermore National Laboratory > > > _______________________________________________ > Freeipmi-devel mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/freeipmi-devel >
_______________________________________________ Freeipmi-devel mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-devel
