Hi David, It seems to be like all the other Supermicro CPU OEM sensors, so I can just add the interpretation support in for you. I'll get a beta tar.gz to you to try.
BTW, > 1143 | PS Status | Power Supply | N/A | N/A | N/A | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h' You can cleanup this messy output w/ the --ignore-unrecognized-events option. (I reported this issue to Supermicro awhile back). Al On Mon, 2011-07-11 at 01:45 -0700, vitamin.b wrote: > Hello, > > i need some help on reading the cpu sensor from this hardware: > Mainboard: Supermicro X8SIL-F Rev. 1.02 > CPU: Intel Xeon L3406 > > > uname -a > bmc-info > ipmi-sensors -V > ipmi-sensors --flush-cache > ipmi-sensors --interpret-oem-data --output-sensor-state > ipmi-sensors --interpret-oem-data --output-sensor-state > --ignore-not-available-sensors > ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71 > > > $ uname -a > Linux vidar 2.6.38-bpo.2-amd64 #1 SMP Mon Jun 6 15:24:02 UTC 2011 x86_64 > GNU/Linux > > > $ bmc-info > Device ID : 32 > Device Revision : 1 > Device SDRs : unsupported > Firmware Revision : 2.50 > Device Available : yes (normal operation) > IPMI Version : 2.0 > Sensor Device : supported > SDR Repository Device : supported > SEL Device : supported > FRU Inventory Device : supported > IPMB Event Receiver : supported > IPMB Event Generator : supported > Bridge : unsupported > Chassis Device : supported > Manufacturer ID : Super Micro Computer Inc. (47488) > Product ID : 1541 > > GUID : 00000000-0000-0000-0000-000000000000 > > Channel Information > > Channel Number : 0 > Medium Type : IPMB (I2C) > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Channel Number : 1 > Medium Type : 802.3 LAN > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : multi-session > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Channel Number : 3 > Medium Type : Asynch. Serial/Modem (RS-232) > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : single-session > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Channel Number : 5 > Medium Type : IPMB (I2C) > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum (7154) > > > $ ipmi-sensors -V > ipmi-sensors - 1.0.5 > Copyright (C) 2003-2010 FreeIPMI Core Team > This program is free software; you may redistribute it under the terms of > the GNU General Public License. This program has absolutely no warranty. > > > $ ipmi-sensors --flush-cache > Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost > > > $ ipmi-sensors --interpret-oem-data --output-sensor-state > Caching SDR repository information: > /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost > Caching SDR record 25 of 25 (current record ID 1612) > ID | Name | Type | State | Reading | Units | > Event > 4 | System Temp | Temperature | Nominal | 55.00 | C | > 'OK' > 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A | > 'OEM Event = 0000h' > 138 | FAN 1 | Fan | Nominal | 1325.00 | RPM | > 'OK' > 205 | FAN 2 | Fan | N/A | N/A | RPM | N/A > 272 | FAN 3 | Fan | Nominal | 1140.00 | RPM | > 'OK' > 339 | FAN 4 | Fan | Nominal | 1140.00 | RPM | > 'OK' > 406 | FAN 5 | Fan | Nominal | 1325.00 | RPM | > 'OK' > 473 | CPU Vcore | Voltage | Nominal | 0.90 | V | > 'OK' > 540 | +3.3VCC | Voltage | Nominal | 3.26 | V | > 'OK' > 607 | +12 V | Voltage | Nominal | 12.14 | V | > 'OK' > 674 | CPU DIMM | Voltage | Nominal | 1.52 | V | > 'OK' > 741 | +5 V | Voltage | Nominal | 5.09 | V | > 'OK' > 808 | -12 V | Voltage | Nominal | -12.48 | V | > 'OK' > 875 | VBAT | Voltage | Nominal | 3.14 | V | > 'OK' > 942 | +3.3VSB | Voltage | Nominal | 3.25 | V | > 'OK' > 1009 | AVCC | Voltage | Nominal | 3.26 | V | > 'OK' > 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A | > 'OK' > 1143 | PS Status | Power Supply | N/A | N/A | N/A | > 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' > 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event > = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h' > > > $ ipmi-sensors --interpret-oem-data --output-sensor-state > --ignore-not-available-sensors > ID | Name | Type | State | Reading | Units | > Event > 4 | System Temp | Temperature | Nominal | 55.00 | C | > 'OK' > 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A | > 'OEM Event = 0000h' > 138 | FAN 1 | Fan | Nominal | 1325.00 | RPM | > 'OK' > 272 | FAN 3 | Fan | Nominal | 1140.00 | RPM | > 'OK' > 339 | FAN 4 | Fan | Nominal | 1140.00 | RPM | > 'OK' > 406 | FAN 5 | Fan | Nominal | 1510.00 | RPM | > 'OK' > 473 | CPU Vcore | Voltage | Nominal | 0.90 | V | > 'OK' > 540 | +3.3VCC | Voltage | Nominal | 3.26 | V | > 'OK' > 607 | +12 V | Voltage | Nominal | 12.14 | V | > 'OK' > 674 | CPU DIMM | Voltage | Nominal | 1.53 | V | > 'OK' > 741 | +5 V | Voltage | Nominal | 5.09 | V | > 'OK' > 808 | -12 V | Voltage | Nominal | -12.48 | V | > 'OK' > 875 | VBAT | Voltage | Nominal | 3.14 | V | > 'OK' > 942 | +3.3VSB | Voltage | Nominal | 3.25 | V | > 'OK' > 1009 | AVCC | Voltage | Nominal | 3.26 | V | > 'OK' > 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A | > 'OK' > 1143 | PS Status | Power Supply | N/A | N/A | N/A | > 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' > 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event > = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h' > > > $ ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71 > Record ID: 71 > ID String: CPU Temp > Sensor Type: OEM Reserved (C0h) > Sensor Number: 18 > IPMB Slave Address: 10h > Sensor Owner ID: 20h > Sensor Owner LUN: 0h > Channel Number: 0h > Entity ID: processor (3) > Entity Instance: 1 > Entity Instance Type: Physical Entity > Event/Reading Type Code: 70h > Sensor State: N/A > Sensor Event: 'OEM Event = 0000h' > > > best regards > David > > > _______________________________________________ > Freeipmi-devel mailing list > Freeipmi-devel@gnu.org > https://lists.gnu.org/mailman/listinfo/freeipmi-devel -- Albert Chu ch...@llnl.gov Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list Freeipmi-devel@gnu.org https://lists.gnu.org/mailman/listinfo/freeipmi-devel
