Hi Greg, > Will freeipmi handle/report states other than "Nominal" and events > other than "Low" as-is?
Yes. The states that can be reported are Low, Medium, High, and Overheat. The sensor state will be adjusted appropriately on different readings (see /etc/freeipmi/freeipmi_interpret_sensor.conf). > Or would I need to collect the same data when > the system is in another state? I'm not quite sure what you're asking for here. Al On Wed, 2011-11-09 at 13:27 -0800, Gregyski wrote: > Hi again Al, > > That worked out perfectly: > > $ sudo ipmi-sensors --interpret-oem-data --output-sensor-state > --ignore-not-available-sensors --ignore-unrecognized-events -h HOSTIP -u > USERNAME -p PASSWORD > ID | Name | Type | State | Reading | > Units | Event > 4 | System Temp | Temperature | Nominal | 32.00 | C > | 'OK' > 71 | CPU Temp | OEM Reserved | Nominal | N/A | N/A > | 'Low' > 272 | FAN 3 | Fan | Nominal | 1080.00 | RPM > | 'OK' > 473 | Vcore | Voltage | Nominal | 1.00 | V > | 'OK' > 540 | 3.3VCC | Voltage | Nominal | 3.36 | V > | 'OK' > 607 | 12V | Voltage | Nominal | 12.30 | V > | 'OK' > 674 | VDIMM | Voltage | Nominal | 1.50 | V > | 'OK' > 741 | 5VCC | Voltage | Nominal | 5.09 | V > | 'OK' > 808 | -12V | Voltage | Nominal | -12.06 | V > | 'OK' > 875 | VBAT | Voltage | Nominal | 3.17 | V > | 'OK' > 942 | VSB | Voltage | Nominal | 3.34 | V > | 'OK' > 1009 | AVCC | Voltage | Nominal | 3.38 | V > | 'OK' > 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A > | 'OK' > 1143 | PS Status | Power Supply | Nominal | N/A | N/A > | 'Presence detected' > > Will freeipmi handle/report states other than "Nominal" and events > other than "Low" as-is? Or would I need to collect the same data when > the system is in another state? > > Thanks so much! > Greg > > On 08.11.2011 17:14, Albert Chu wrote: > > Hi Greg, > > > > Unfortunately, since Supermicro's product ids are completely random, > > I > > just have to add them as they arise. I've having trouble uploading > > to > > the download site, hopefully pulling from the SVN tree would be ok > > for a > > quick test? > > > > svn co > > > > http://svn.savannah.gnu.org/svn/freeipmi/branches/Release-1_0_0_branch > > > > Remember to use the --interpret-oem-data option. > > > > Thanks, > > > > Al > > > -- Albert Chu [email protected] Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-devel
