Hello, could you please place the product-ID (motherboard) into the source code of freeIPMI, because our customer can not view the CPU sensors. FreeIPMI log is attached.
Thank you very much, Erwin Stumpp -- Mit freundlichen Grüßen aus Freyung Erwin Stumpp Technik Tel: +49(0)8551/9150-643 Fax: +49(0)8551/9150-55 E-Mail: [email protected] Online: www.thomas-krenn.com ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ http://www.thomas-krenn.com/wiki (Wiki zur Servertechnik mit vielen Infos) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Thomas-Krenn.AG Speltenbach-Steinäcker 1 D - 94078 Freyung USt-Id: DE 232 683 379 HRB 6790 Amtsgericht Passau Sitz der Gesellschaft: Freyung Aufsichtsratsvorsitzender: Dipl.-Ing. MBA Willi Mannheims Vorstand: Christoph Maier Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
root@monti:~# bmc-info -h 192.168.1.1 -user -u ADMIN -p **** Device ID : 32 Device Revision : 1 Device SDRs : unsupported Firmware Revision : 2.05 Device Available : yes (normal operation) IPMI Version : 2.0 Sensor Device : supported SDR Repository Device : supported SEL Device : supported FRU Inventory Device : supported IPMB Event Receiver : supported IPMB Event Generator : supported Bridge : unsupported Chassis Device : supported Manufacturer ID : Super Micro Computer Inc. (47488) Product ID : 43707 Auxiliary Firmware Revision Information : 00000001h GUID : 00000000-0000-0000-0000-000000434d53 System Firmware Version : rsion1.0 System Name : ******* Primary Operating System Name : SE Server 1.0 Operating System Name : VMware ESXi 5.0.0 build-515841 Channel Information Channel Number : 0 Medium Type : IPMB (I2C) Protocol Type : IPMB-1.0 Active Session Count : 0 Session Support : session-less Vendor ID : Intelligent Platform Management Interface forum (7154) Channel Number : 1 Medium Type : 802.3 LAN Protocol Type : IPMB-1.0 Active Session Count : 1 Session Support : multi-session Vendor ID : Intelligent Platform Management Interface forum (7154) root@monti:~# ipmi-sensors -V ipmi-sensors - 1.1.2 Copyright (C) 2003-2012 FreeIPMI Core Team This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no warranty. root@monti:~# ipmi-sensors --flush-cache Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-monti.localhost root@monti:~# ipmi-sensors --interpret-oem-data --output-sensor-state -h 192.168.1.1 -user -u ADMIN -p **** ID | Name | Type | State | Reading | Units | Event 7 | CPU1 Temp | OEM Reserved | Nominal | N/A | N/A | 'Low' 8 | CPU2 Temp | OEM Reserved | Nominal | N/A | N/A | 'Low' 9 | System Temp | Temperature | Nominal | 39.00 | C | 'OK' 10 | CPU1 Vcore | Voltage | Nominal | 0.98 | V | 'OK' 11 | CPU2 Vcore | Voltage | Nominal | 0.98 | V | 'OK' 12 | CPU1 DIMM | Voltage | Nominal | 1.58 | V | 'OK' 13 | CPU2 DIMM | Voltage | Nominal | 1.58 | V | 'OK' 14 | +1.5V | Voltage | Nominal | 1.51 | V | 'OK' 15 | +3.3V | Voltage | Nominal | 3.26 | V | 'OK' 16 | +3.3VSB | Voltage | Nominal | 3.24 | V | 'OK' 17 | +5V | Voltage | Nominal | 5.06 | V | 'OK' 18 | +12V | Voltage | Nominal | 12.03 | V | 'OK' 19 | VBAT | Voltage | Nominal | 3.24 | V | 'OK' 20 | Fan1 | Fan | Nominal | 1080.00 | RPM | 'OK' 21 | Fan2 | Fan | Nominal | 1080.00 | RPM | 'OK' 24 | Fan5 | Fan | Nominal | 1080.00 | RPM | 'OK' 26 | Fan7 | Fan | Nominal | 1890.00 | RPM | 'OK' 27 | Fan8 | Fan | Nominal | 1890.00 | RPM | 'OK' 28 | P1-DIMM1A Temp | Temperature | Nominal | 43.00 | C | 'OK' 29 | P1-DIMM1B Temp | Temperature | N/A | N/A | C | N/A 30 | P1-DIMM2A Temp | Temperature | Nominal | 43.00 | C | 'OK' 31 | P1-DIMM2B Temp | Temperature | N/A | N/A | C | N/A 32 | P1-DIMM3A Temp | Temperature | Nominal | 42.00 | C | 'OK' 33 | P1-DIMM3B Temp | Temperature | N/A | N/A | C | N/A 34 | P2-DIMM1A Temp | Temperature | Nominal | 41.00 | C | 'OK' 35 | P2-DIMM1B Temp | Temperature | N/A | N/A | C | N/A 36 | P2-DIMM2A Temp | Temperature | Nominal | 45.00 | C | 'OK' 37 | P2-DIMM2B Temp | Temperature | N/A | N/A | C | N/A 38 | P2-DIMM3A Temp | Temperature | Nominal | 51.00 | C | 'OK' 39 | P2-DIMM3B Temp | Temperature | N/A | N/A | C | N/A 40 | Intrusion | Physical Security | Nominal | N/A | N/A | 'OK' 41 | PS Status | Power Supply | Nominal | N/A | N/A | 'OK' root@monti:~# ipmi-sensors --interpret-oem-data --output-sensor-state --ignore-not-available-sensors -h 192.168.1.1 -user -u ADMIN -p **** ID | Name | Type | State | Reading | Units | Event 7 | CPU1 Temp | OEM Reserved | Nominal | N/A | N/A | 'Low' 8 | CPU2 Temp | OEM Reserved | Nominal | N/A | N/A | 'Low' 9 | System Temp | Temperature | Nominal | 39.00 | C | 'OK' 10 | CPU1 Vcore | Voltage | Nominal | 0.98 | V | 'OK' 11 | CPU2 Vcore | Voltage | Nominal | 0.98 | V | 'OK' 12 | CPU1 DIMM | Voltage | Nominal | 1.58 | V | 'OK' 13 | CPU2 DIMM | Voltage | Nominal | 1.58 | V | 'OK' 14 | +1.5V | Voltage | Nominal | 1.51 | V | 'OK' 15 | +3.3V | Voltage | Nominal | 3.26 | V | 'OK' 16 | +3.3VSB | Voltage | Nominal | 3.24 | V | 'OK' 17 | +5V | Voltage | Nominal | 5.06 | V | 'OK' 18 | +12V | Voltage | Nominal | 12.03 | V | 'OK' 19 | VBAT | Voltage | Nominal | 3.24 | V | 'OK' 20 | Fan1 | Fan | Nominal | 1080.00 | RPM | 'OK' 21 | Fan2 | Fan | Nominal | 1080.00 | RPM | 'OK' 24 | Fan5 | Fan | Nominal | 1080.00 | RPM | 'OK' 26 | Fan7 | Fan | Nominal | 1890.00 | RPM | 'OK' 27 | Fan8 | Fan | Nominal | 1890.00 | RPM | 'OK' 28 | P1-DIMM1A Temp | Temperature | Nominal | 43.00 | C | 'OK' 30 | P1-DIMM2A Temp | Temperature | Nominal | 43.00 | C | 'OK' 32 | P1-DIMM3A Temp | Temperature | Nominal | 42.00 | C | 'OK' 34 | P2-DIMM1A Temp | Temperature | Nominal | 41.00 | C | 'OK' 36 | P2-DIMM2A Temp | Temperature | Nominal | 45.00 | C | 'OK' 38 | P2-DIMM3A Temp | Temperature | Nominal | 51.00 | C | 'OK' 40 | Intrusion | Physical Security | Nominal | N/A | N/A | 'OK' 41 | PS Status | Power Supply | Nominal | N/A | N/A | 'OK' root@monti:~# ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=7,8 -h 192.168.1.1 -user -u ADMIN -p **** Record ID: 7 ID String: CPU1 Temp Sensor Type: OEM Reserved (C0h) Sensor Number: 1 IPMB Slave Address: 10h Sensor Owner ID: 20h Sensor Owner LUN: 0h Channel Number: 0h Entity ID: processor (3) Entity Instance: 1 Entity Instance Type: Physical Entity Event/Reading Type Code: 70h Sensor State: Nominal Sensor Event: 'Low' Record ID: 8 ID String: CPU2 Temp Sensor Type: OEM Reserved (C0h) Sensor Number: 2 IPMB Slave Address: 10h Sensor Owner ID: 20h Sensor Owner LUN: 0h Channel Number: 0h Entity ID: processor (3) Entity Instance: 2 Entity Instance Type: Physical Entity Event/Reading Type Code: 70h Sensor State: Nominal Sensor Event: 'Low'
_______________________________________________ Freeipmi-devel mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-devel
