Hi Werner, It should be in the next release.
Al On Thu, 2012-05-31 at 23:26 -0700, Werner Fischer wrote: > Hi Al, > > we have tested a new Supermicro mainboard (X9DRi-F) > http://www.supermicro.com/products/motherboard/xeon/c600/x9dri-f.cfm > with FreeIPMI 1.1.5. > > The board has Product ID 1576 / Manufacturer ID 10876 - here is the > output of bmc-info: > Device ID : 32 > Device Revision : 1 > Device SDRs : unsupported > Firmware Revision : 1.63 > Device Available : yes (normal operation) > IPMI Version : 2.0 > Sensor Device : supported > SDR Repository Device : supported > SEL Device : supported > FRU Inventory Device : supported > IPMB Event Receiver : supported > IPMB Event Generator : supported > Bridge : unsupported > Chassis Device : supported > Manufacturer ID : Super Micro Computer Inc. (10876) > Product ID : 1576 > > Can you add the tweaks for this product ID in the FreeIPMI code to > support the two CPU Temp sensors? The current output of FreeIPMI 1.1.5 > (ipmi-sensors --output-sensor-state --interpret-oem-data) > does not recognize the CPU Temp sensors (in this example case one of > these two sensors shows temperature 'medium' afair from the web > interface): > ID | Name | Type | State | Reading | > Units | Event > 4 | CPU1 Temp | OEM Reserved | N/A | N/A | > N/A | 'OEM Event = 0001h' > 71 | CPU2 Temp | OEM Reserved | N/A | N/A | > N/A | 'OEM Event = 0007h' > 138 | System Temp | Temperature | Nominal | 37.00 | > C | 'OK' > > FYI here is the verbose output of these two sensors, > ipmi-sensors --output-sensor-state --interpret-oem-data -vv > Record ID: 4 > Record Type: Full Sensor Record (1h) > ID String: CPU1 Temp > Sensor Type: OEM Reserved (C0h) > Sensor Number: 1 > IPMB Slave Address: 10h > Sensor Owner ID: 20h > Sensor Owner LUN: 0h > Channel Number: 0h > Entity ID: processor (3) > Entity Instance: 1 > Entity Instance Type: Physical Entity > Event/Reading Type Code: 70h > Accuracy: 0.000000% > Sensor Direction: Unspecified > Positive Hysteresis: N/A > Negative Hysteresis: N/A > Sensor State: N/A > Sensor Event: 'OEM Event = 0001h' > > Record ID: 71 > Record Type: Full Sensor Record (1h) > ID String: CPU2 Temp > Sensor Type: OEM Reserved (C0h) > Sensor Number: 2 > IPMB Slave Address: 10h > Sensor Owner ID: 20h > Sensor Owner LUN: 0h > Channel Number: 0h > Entity ID: processor (3) > Entity Instance: 1 > Entity Instance Type: Physical Entity > Event/Reading Type Code: 70h > Accuracy: 0.000000% > Sensor Direction: Unspecified > Positive Hysteresis: N/A > Negative Hysteresis: N/A > Sensor State: N/A > Sensor Event: 'OEM Event = 0007h' > > Thanks in advance and best regards, > Werner > -- Albert Chu [email protected] Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-devel
