Albert, I munged the make files to build the code and it seems better, but not sure about the PS. We have two of them and they are in a nominal state. Here is the output:
./ipmi-sensors --interpret-oem-data -b ID | Name | Type | Reading | Units | Event 4 | CPU1 Temp | OEM Reserved | N/A | N/A | 'Low' 71 | CPU2 Temp | OEM Reserved | N/A | N/A | 'Low' 138 | System Temp | Temperature | 18.00 | C | 'OK' 205 | Peripheral Temp | Temperature | 26.00 | C | 'OK' 272 | PCH Temp | Temperature | 43.00 | C | 'OK' 339 | FAN1 | Fan | 12450.00 | RPM | 'OK' 406 | FAN2 | Fan | 13500.00 | RPM | 'OK' 473 | FAN3 | Fan | 13350.00 | RPM | 'OK' 540 | FAN4 | Fan | 13050.00 | RPM | 'OK' 607 | FAN5 | Fan | N/A | RPM | N/A 674 | FAN6 | Fan | N/A | RPM | N/A 741 | FANA | Fan | N/A | RPM | N/A 808 | FANB | Fan | N/A | RPM | N/A 875 | VTT | Voltage | 1.04 | V | 'OK' 942 | CPU1 Vcore | Voltage | 0.93 | V | 'OK' 1009 | CPU2 Vcore | Voltage | 0.90 | V | 'OK' 1076 | VDIMM AB | Voltage | 1.47 | V | 'OK' 1143 | VDIMM CD | Voltage | 1.49 | V | 'OK' 1210 | VDIMM EF | Voltage | 1.49 | V | 'OK' 1277 | VDIMM GH | Voltage | 1.49 | V | 'OK' 1344 | +1.1 V | Voltage | 1.09 | V | 'OK' 1411 | +1.5 V | Voltage | 1.47 | V | 'OK' 1478 | 3.3V | Voltage | 3.26 | V | 'OK' 1545 | +3.3VSB | Voltage | 3.36 | V | 'OK' 1612 | 5V | Voltage | 4.99 | V | 'OK' 1679 | +5VSB | Voltage | 5.06 | V | 'OK' 1746 | 12V | Voltage | 12.19 | V | 'OK' 1813 | VBAT | Voltage | 3.17 | V | 'OK' 1880 | Chassis Intru | Physical Security | N/A | N/A | 'General Chassis Intrusion' 1947 | PS Status | Power Supply | N/A | N/A | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h' sudo ./ipmi-sensors --interpret-oem-data -b -v -r 1947 Record ID: 1947 ID String: PS Status Sensor Type: Power Supply (8h) Sensor Number: 85 IPMB Slave Address: 10h Sensor Owner ID: 20h Sensor Owner LUN: 0h Channel Number: 0h Entity ID: power supply (10) Entity Instance: 1 Entity Instance Type: Physical Entity Event/Reading Type Code: 6Fh Sensor Event: 'Presence detected' Sensor Event: 'Unrecognized Event = 0100h' Sensor Event: 'Unrecognized Event = 0200h' Sensor Event: 'Unrecognized Event = 0400h' Sensor Event: 'Unrecognized Event = 0800h' Sensor Event: 'Unrecognized Event = 1000h' Sensor Event: 'Unrecognized Event = 2000h' Sensor Event: 'Unrecognized Event = 4000h' Thanks for looking into this. --Garry On Wed, Dec 5, 2012 at 11:40 AM, anonymous <[email protected]> wrote: > Follow-up Comment #2, sr #108197 (project freeipmi): > > I pulled the source down, but get the following error: > > ./autogen.sh > + aclocal -I config > + autoheader > + libtoolize --force --automake --copy > + automake --gnu --include-deps --copy --add-missing > doc/Makefile.am:16: `doc_DATA' is used but `docdir' is undefined > Makefile.am:85: `doc_DATA' is used but `docdir' is undefined > > and ./configure does not exist. > > I was running 1.2.3 which I forgot to mention. > > Thanks for your quick response > --Garry > > > _______________________________________________________ > > Reply to this item at: > > <http://savannah.gnu.org/support/?108197> > > _______________________________________________ > Message sent via/by Savannah > http://savannah.gnu.org/ > -- Garry Anderson | Operations Engineer | [email protected] | 303.997.7488x117 Gnip _______________________________________________ Freeipmi-devel mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-devel
