I am using 1.5.5 version. Below are the packet details along with errors. Except for the 3rd scenario all other errors are very frequent
*1)* *Failed right away (first sdr request in the trace)* Get SDR Repository Info Request ===================================================== KCS Header: ------------ [ 0h] = lun[ 2b] [ Ah] = net_fn[ 6b] IPMI Command Data: ------------------ [ 20h] = cmd[ 8b] (ipmi_monitoring_sdr_cache.c, ipmi_monitoring_sdr_cache_load, 314): ipmi_sdr_cache_open: internal IPMI error ipmi_monitoring_sensor_readings_by_record_id: internal error *2)* *a) Failed right away (first sdr request in the trace)* ===================================================== Get SDR Repository Info Request ===================================================== KCS Header: ------------ [ 0h] = lun[ 2b] [ Ah] = net_fn[ 6b] IPMI Command Data: ------------------ [ 20h] = cmd[ 8b] (ipmi_monitoring_sdr_cache.c, _ipmi_monitoring_sdr_cache_retrieve, 223): ipmi_sdr_cache_create: internal IPMI error ipmi_monitoring_sensor_readings_by_record_id: internal error *b) Failed after going though some sdr requests * ===================================================== Get SDR Request ===================================================== KCS Header: ------------ [ 0h] = lun[ 2b] [ Ah] = net_fn[ 6b] IPMI Command Data: ------------------ [ 23h] = cmd[ 8b] [ 8820h] = reservation_id[16b] [ 82h] = record_id[16b] [ 25h] = offset_into_record[ 8b] [ 10h] = bytes_to_read[ 8b] (ipmi_monitoring_sdr_cache.c, _ipmi_monitoring_sdr_cache_retrieve, 223): ipmi_sdr_cache_create: internal IPMI error ipmi_monitoring_sensor_readings_by_record_id: internal error 3) *Failed right away (first sdr request in the trace). Seen this only twice* ===================================================== Get SDR Repository Info Request ===================================================== KCS Header: ------------ [ 0h] = lun[ 2b] [ Ah] = net_fn[ 6b] IPMI Command Data: ------------------ [ 20h] = cmd[ 8b] (ipmi_monitoring_sdr_cache.c, ipmi_monitoring_sdr_cache_load, 336): ipmi_sdr_cache_open: internal IPMI error ipmi_monitoring_sensor_readings_by_record_id: internal error 4) *a) Failed at Reading Request* ===================================================== Get Sensor Reading Request ===================================================== KCS Header: ------------ [ 0h] = lun[ 2b] [ 4h] = net_fn[ 6b] IPMI Command Data: ------------------ [ 2Dh] = cmd[ 8b] [ B0h] = sensor_number[ 8b] (ipmi_monitoring_sensor_reading.c, _get_sensor_reading, 356): ipmi_sensor_read: internal IPMI error (ipmi_monitoring.c, _ipmi_monitoring_sensor_readings_by_record_id, 1449): ipmi_sdr_cache_iterate: error returned in callback ipmi_monitoring_sensor_readings_by_record_id: internal error *b) Failed at Reading Response* ===================================================== Get Sensor Reading Request ===================================================== KCS Header: ------------ [ 0h] = lun[ 2b] [ 4h] = net_fn[ 6b] IPMI Command Data: ------------------ [ 2Dh] = cmd[ 8b] [ 90h] = sensor_number[ 8b] ===================================================== Get Sensor Reading Response ===================================================== KCS Header: ------------ [ 0h] = lun[ 2b] [ 5h] = net_fn[ 6b] IPMI Command Data: ------------------ [ 0h] = cmd[ 8b] (ipmi_monitoring_sensor_reading.c, _get_sensor_reading, 356): ipmi_sensor_read: internal IPMI error (ipmi_monitoring.c, _ipmi_monitoring_sensor_readings_by_record_id, 1449): ipmi_sdr_cache_iterate: error returned in callback ipmi_monitoring_sensor_readings_by_record_id: internal error Thanks On Mon, Jul 17, 2017 at 11:46 PM, Albert Chu <achu.de...@gmail.com> wrote: > Hi, > > What version of FreeIPMI are you using? The line numbers don't quite line > up with the master branch. > > Also, could you set IPMI_MONITORING_FLAGS_DEBUG_IPMI_PACKETS and show the > IPMI packet that occurs right before the error line? > > Thanks, > > Al > > On Mon, Jul 17, 2017 at 4:28 PM, Sohan Chowdary Kollu <sko...@ncsu.edu> > wrote: > >> Hi Albert, >> >> Thanks for quick response. I have set the flags for debugging and found >> it failing at one of the three instances below in different runs. >> >> 1) (ipmi_monitoring_sensor_reading.c, _get_sensor_reading, 356): >> ipmi_sensor_read: internal system error(ipmi_monitoring.c, >> _ipmi_monitoring_sensor_readings_by_record_id, 1449): >> ipmi_sdr_cache_iterate: error returned in callback >> ipmi_monitoring_sensor_readings_by_record_id: internal error >> >> 2)(ipmi_monitoring_sdr_cache.c, ipmi_monitoring_sdr_cache_load, 314): >> ipmi_sdr_cache_open: internal IPMI error >> ipmi_monitoring_sensor_readings_by_record_id: >> internal error >> >> 3) (ipmi_monitoring_sdr_cache.c, _ipmi_monitoring_sdr_cache_retrieve, >> 223): ipmi_sdr_cache_create: internal IPMI error >> ipmi_monitoring_sensor_readings_by_record_id: >> internal error >> >> >> Thanks >> >> On Mon, Jul 17, 2017 at 2:34 PM, Albert Chu <ch...@llnl.gov> wrote: >> >>> The "internal error" indicates some logical error that the library >>> doesn't know how to handle. Given its coming from >>> ipmi_monitoring_sensor_readings_by_record_id and it occurs when you run >>> the program back to back, I would bet there is some internal IPMI issue >>> on your system. Perhaps its a new error code or something like that >>> that I do not handle gracefully correctly. >>> >>> To try and debug, could you set the flag "IPMI_MONITORING_FLAGS_DEBUG | >>> IPMI_MONITORING_FLAGS_DEBUG_IPMI_PACKETS" when calling >>> ipmimonitoring_init() in the example code. Hopefully that'll be enough >>> to figure out the issue. >>> >>> Al >>> >>> On Mon, 2017-07-17 at 13:03 -0700, Sohan Chowdary Kollu wrote: >>> > Hi, >>> > >>> > I am executing the ipmimonitoring-sensors.c example provided in the >>> > freeipmi library. It throws internal error sometimes. Issue is >>> > reproducible when i execute the program back to back couple of times. >>> > I need to wait approximately 30 sec or more after the last execution >>> > for the program to run properly. >>> > >>> > >>> > This is the error ipmi_monitoring_sensor_readings_by_record_id: >>> > internal error >>> > >>> > >>> > >>> > I ran some of the commands on terminal back to back , including >>> > ipmi-sensors with group option, ipmimonitoring etc. None of them thew >>> > any errors. Error occurs only when i am use the API. >>> > >>> > >>> > Has anyone faced this issue before? If yes, can you tell me how to >>> > avoid it >>> > >>> > >>> > >>> > >>> > Thanks, >>> > Sohan >>> > _______________________________________________ >>> > Freeipmi-devel mailing list >>> > Freeipmi-devel@gnu.org >>> > https://lists.gnu.org/mailman/listinfo/freeipmi-devel >>> >>> -- >>> Albert Chu >>> ch...@llnl.gov >>> Computer Scientist >>> High Performance Systems Division >>> Lawrence Livermore National Laboratory >>> >>> >>> >> >> >> -- >> Thanks, >> Sohan >> >> _______________________________________________ >> Freeipmi-devel mailing list >> Freeipmi-devel@gnu.org >> https://lists.gnu.org/mailman/listinfo/freeipmi-devel >> >> > -- Thanks, Sohan
_______________________________________________ Freeipmi-devel mailing list Freeipmi-devel@gnu.org https://lists.gnu.org/mailman/listinfo/freeipmi-devel