Bala.A wrote:
Hi Tim,
We haven't tested SSIF completely.
FreeIPMI has probing tool called ipmi-locate.
I would like to know output of ipmi-locate command on your machine.
Thanks,
Best Regards,
Bala
---
Free as in freedom
http://www.gnu.org/
Hi Tim,
Are you trying to use the on-board IPMI or one of the Management Modules
(Pro or Advanced)?
The default (i.e. no management modules) using the SSIF interface for
in-band communication. I'm not 100% whether or not that implementation
in FreeIPMI has been fully tested (I think Intel is the only vendor that
uses SSIF?). Bala or A.B. may have more information on its current
tested state.
For the time being, could you run 'ipmi-locate'?
Al
--
Albert Chu
[EMAIL PROTECTED]
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory
----- Original Message -----
From: Tim <[EMAIL PROTECTED]>
Date: Thursday, April 6, 2006 11:21 pm
Subject: [Freeipmi-users] Intel SE7210TP1-E
Hi All,
I am trying to use this with an Intel Server Mobo SE7210TP1-E.
It hangs everytime I use/run bmc-info
I am using FreeIPMI 2.0
Version:
openipmi # bmc-info -V
BMC Information [bmc-info-0.2.0]
_______________________________________________
Freeipmi-users mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/freeipmi-users
_______________________________________________
Freeipmi-users mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/freeipmi-users
Hi,
I was able to get info remotely.. but it has some issues. Sometimes it
will just hangs.
I had this in a loop: while x=0; do ipmi-sensors -h 192.168.0.103 | grep
Temp; x=0; done
While I put some load on the server to watch the temps change, get a
feel for the results.
And I get this error: ipmi_open_outofband(): Input/output error
From what I have read about this board, the mBMC data is sent to the
100Mb Nic this
above ip addr is on that NIC.
I have not be able to run {bmc-info, or ipmi-sensors} locally at all...
Here is the output of ipmi-locate
Probing KCS device using SMBIOS... FAILED
Probing SMIC device using SMBIOS... FAILED
Probing BT device using SMBIOS... FAILED
Probing SSIF device using SMBIOS... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: (null)
BMC SMBUS slave address: 4
Register space: 0
Probing KCS device using ACPI... FAILED
Probing SMIC device using ACPI... FAILED
Probing BT device using ACPI... FAILED
Probing SSIF device using ACPI... FAILED
Probing KCS device using PCI... FAILED
Probing SMIC device using PCI... FAILED
Probing BT device using PCI... FAILED
Probing SSIF device using PCI... FAILED
KCS device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI locate driver: 0
IPMI interface: KCS
BMC I2C device: (null)
BMC I/O base address: CA2
Register space: 1
SMIC device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI locate driver: 0
IPMI interface: SMIC
BMC I2C device: (null)
BMC I/O base address: CA9
Register space: 1
BT device default values:
SSIF device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI locate driver: 0
IPMI interface: SSIF
BMC I2C device: /dev/i2c-0
BMC SMBUS slave address: 20
Register space: 1
_______________________________________________
Freeipmi-users mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/freeipmi-users
