Hello,
I'm trying to set up FreeIPMI on a Scientific Linux Cern (RHEL) 4,
with this kernel:
Linux lxdev14.cern.ch 2.6.9-34.EL.cernsmp #1 SMP Sun Mar 12 12:46:00 CET 2006
i686 i686 i386 GNU/Linux
and this version:
[EMAIL PROTECTED] ~]# dmesg | grep ipmi
ipmi message handler version 33.11
ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca8, slave
address 0x20
ipmi device interface version 33.11
ipmi device interface version 33.11
and with this controller:
00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
Handle 0x003B
DMI type 38, 18 bytes.
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA8 (I/O)
Register Spacing: 32-bit Boundaries
When I try to run bmc-info, it hangs, and strace says:
getuid32() = 0
setrlimit(RLIMIT_CORE, {rlim_cur=RLIM_INFINITY, rlim_max=RLIM_INFINITY}) = 0
brk(0) = 0x9790000
brk(0x97b1000) = 0x97b1000
open("/dev/mem", O_RDONLY|O_SYNC) = 3
mmap2(NULL, 65536, PROT_READ, MAP_PRIVATE, 3, 0xf0) = 0xb7f70000
close(3) = 0
open("/dev/mem", O_RDONLY|O_SYNC) = 3
mmap2(NULL, 3236, PROT_READ, MAP_PRIVATE, 3, 0xfa) = 0xb7f6f000
close(3) = 0
munmap(0xb7f6f000, 3236) = 0
munmap(0xb7f70000, 65536) = 0
iopl(0x3) = 0
stat64("/var/lib/freeipmi/ipckey", {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
semget(33783988, 1, IPC_CREAT|IPC_EXCL|0600) = -1 EEXIST (File exists)
semget(33783988, 1, IPC_CREAT|0600) = 0
semop(0, 0x4cb082, 1) = 0
nanosleep({0, 1000}, NULL) = 0
nanosleep({0, 1000}, NULL) = 0
nanosleep({0, 1000}, NULL) = 0
nanosleep({0, 1000}, NULL) = 0
and so on.
Any ideas???
Thank you!
--
Massimiliano Masi
http://gauss.comunidelchianti.it/~max
_______________________________________________
Freeipmi-users mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/freeipmi-users
