On Wed, Nov 29, 2006 at 08:08:35PM +0530, Tejram Meena wrote: ,---- | I have installed the latest Freeipmi-0.2.3 from packages available | for 6.2-release for FreeBSD (amd64) with guile-1.6.8 as its | dependency. | | Machine Info: | Manufacturer: IBM | Product Name: eserver xSeries 336 -[883715U]- | Processor Information | Socket Designation: Socket 1 CPU 1 | Type: Central Processor | Family: Xeon | Manufacturer: GenuineIntel | IPMI Device Information | Interface Type: KCS (Keyboard Control Style) | Specification Version: 1.5 | I2C Slave Address: 0x10 | NV Storage Device: Not Present | Base Address: 0x0000000000000CA8 (I/O) | Register Spacing: 32-bit Boundaries | | Dmesg Info | ipmi0: <System Management BIOS> at iomem | 0xfdfe0-0xfdffe,0xf5faa-0xf6861 on isa0 | ipmi0: SMBIOS Version: 2.03, revision: 2.03 | ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa | ipmi0: IPMI device rev. 0, firmware rev. 1.81, version 1.5 | ipmi0: Number of channels 4 | ipmi0: Attached watchdog | | On running ipmi-locate on the above machine: | $ipmi-locate | Probing KCS device using SMBIOS... FAILED | | Probing SMIC device using SMBIOS... FAILED | | Probing BT device using SMBIOS... FAILED | | Probing SSIF device using SMBIOS... FAILED | | Probing KCS device using ACPI... FAILED | | Probing SMIC device using ACPI... FAILED | | Probing BT device using ACPI... FAILED | | Probing SSIF device using ACPI... FAILED | | Probing KCS device using PCI... FAILED | | Probing SMIC device using PCI... FAILED | | Probing BT device using PCI... FAILED | | Probing SSIF device using PCI... FAILED | | KCS device default values: | IPMI Version: 1.5 | IPMI locate driver: DEFAULT | IPMI locate driver: 0 | IPMI interface: KCS | BMC I2C device: (null) | BMC I/O base address: CA2 | Register space: 1 | | SMIC device default values: | IPMI Version: 1.5 | IPMI locate driver: DEFAULT | IPMI locate driver: 0 | IPMI interface: SMIC | BMC I2C device: (null) | BMC I/O base address: CA9 | Register space: 1 | | BT device default values: | | SSIF device default values: | IPMI Version: 1.5 | IPMI locate driver: DEFAULT | IPMI locate driver: 0 | IPMI interface: SSIF | BMC I2C device: /dev/i2c-0 | BMC SMBUS slave address: 42 | Register space: 1 | | Although the machine has KCS, but ipmi-locate fail to probe IPMI | device Cann't figure out where the problem lies. | | Thanks | Tejram Meena `----
Can you please try 0.3.0 release. 0.2.3 is pretty old. Also GNU FreeIPMI has its own drivers. You will have to unload kernel based drivers before running the tools. I don't have experience with FreeBSD system. -- Anand Babu GPG Key ID: 0x62E15A31 Blog [http://ab.freeshell.org] The GNU Operating System [http://www.gnu.org] _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-users
