Hi all, I am trying to bridge the "Get Channel Info" command to one of the blades(0x82) through the Shelf Manager.
Implicitly bridged using -t option to ipmitool. Works fine. But not able to get the channel medium type. I am assuming it to be IPMB-0. [EMAIL PROTECTED] ipmi]$ ipmitool -I lan -H shelfmanager1 -A none -t0x82 channel info Channel 0x0 info: Channel Medium Type : reserved Channel Protocol Type : reserved Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 0 Explicitly bridged in the raw command. No output is seen. [EMAIL PROTECTED] ipmi]$ ipmitool -I lan -H shelfmanager1 -A none raw 0x6 0x34 0x40 0x82 0x18 0x66 0x20 0 0x42 0x0e 0x90 <No output> Implicitly bridged but uses raw command instead of "Channel info" of Ipmitool. No output. [EMAIL PROTECTED] ipmi]$ ipmitool -I lan -H shelfmanager1 -A none -t0x82 raw 0x6 42 0xe <no output> Implicitly bridged and uses "channel Info". Works fine. [EMAIL PROTECTED] ipmi]$ ipmitool -I lan -H shelfmanager1 -A none -t0x82 channel info Channel 0x0 info: Channel Medium Type : reserved Channel Protocol Type : reserved Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 0 Below is the experiment to show that the raw string for "Channel info" is valid. [EMAIL PROTECTED] ipmi]$ ipmitool -I lan -H shelfmanager1 -A none raw 0x6 0x42 0xe 01 04 01 81 f2 1b 00 00 00 [EMAIL PROTECTED] ipmi]$ ipmitool -I lan -H shelfmanager1 -A none channel info Channel 0x1 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 1 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : enabled Per-message Auth : enabled User Level Auth : enabled Access Mode : always available Non-Volatile Settings Alerting : enabled Per-message Auth : enabled User Level Auth : enabled Access Mode : always available Now the questions are, 1. Why the "Get channel info" is not succeeding when issued to blade using the raw command, but succeeding when issued through "Channel Info" command of Ipmitool? 2. I am not able to bridge the Get channel info command to the blade, that may be because the raw command itself is failing. regards, -- Raghavendra G OpenClovis Solutions, Bangalore +91 9880213025 _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-users
