Hi Al, KCS-Driver won't work the mBMC PC87431M needs SSIF.......
i hope anyone would provide me some hints how to Debug and where to start... Uli ----- Original Message ----- From: "Al Chu" <[EMAIL PROTECTED]> To: "Schäfer Raumgestaltung" <[EMAIL PROTECTED]> Cc: <[email protected]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, August 28, 2007 6:09 PM Subject: Re: [Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC onSE7320SP2 > Hi Ulrich, > > I've personally never used/developed on the SSIF driver. I've CCed a > few folks that might have a better idea on those details. > > Have you tried the KCS driver? > > Al > > On Sat, 2007-08-25 at 07:43 +0200, Schäfer Raumgestaltung wrote: > > Big trouble in little China.... > > > > Board: Intel SE7320Sp2 > > mBMC PC87431M > > > > Distro: Opensuse 10.2 (Kernel 2.6.18) > > Arch: x86_64 > > > > > > Done so far: > > > > built Freeipmi 0.4.3 RPM from Sources (thanks to Opensuse Buildservice) > > > > Trying to read Sensor-Values like.... > > > > >ipmi-sensors -D ssif --driver-device /dev/i2c-0 --driver-address 0x42 > > > > Fetching SDR repository Information ...done > > FAILED: Retrieval of SDR record 0x0ord ID 0) > > > > SDR Cache creation failed: internal_error > > ..... or somtimes (until flushing Cache with -f) > > SDR Cache creation failed: ipmi_communication_error > > > > > > any hints what's going wrong ?? > > > > > > attached: some "Diagnostic" > > > > >lsmod |grep i2c > > > > i2c_dev 28168 0 > > i2c_i801 25364 0 > > i2c_core 41472 2 i2c_dev,i2c_i801 > > > > ============================================================================ =========================== > > > > >i2cdetect -l 0 > > > > i2c-0 smbus SMBus I801 adapter at 0400 Non-I2C SMBus adapter > > > > ============================================================================ =========================== > > >ipmi-locate > > > > > > Probing KCS device using DMIDECODE... FAILED > > > > Probing SMIC device using DMIDECODE... FAILED > > > > Probing BT device using DMIDECODE... FAILED > > > > Probing SSIF device using DMIDECODE... done > > IPMI Version: 1.5 > > IPMI locate driver: DMIDECODE > > IPMI interface: SSIF > > BMC driver device: /dev/i2c-0 > > BMC SMBUS slave address: 42 > > Register space: 1 > > > > Probing KCS device using SMBIOS... FAILED > > > > Probing SMIC device using SMBIOS... FAILED > > > > Probing BT device using SMBIOS... FAILED > > > > Probing SSIF device using SMBIOS... done > > IPMI Version: 1.5 > > IPMI locate driver: SMBIOS > > IPMI interface: SSIF > > BMC driver device: /dev/i2c-0 > > BMC SMBUS slave address: 84 > > Register space: 1 > > > > Probing KCS device using ACPI... FAILED > > > > Probing SMIC device using ACPI... FAILED > > > > Probing BT device using ACPI... FAILED > > > > Probing SSIF device using ACPI... FAILED > > > > Probing KCS device using PCI... FAILED > > > > Probing SMIC device using PCI... FAILED > > > > Probing BT device using PCI... FAILED > > > > Probing SSIF device using PCI... FAILED > > > > KCS device default values: > > IPMI Version: 1.5 > > IPMI locate driver: DEFAULT > > IPMI interface: KCS > > BMC driver device: > > BMC I/O base address: CA2 > > Register space: 1 > > > > SMIC device default values: > > IPMI Version: 1.5 > > IPMI locate driver: DEFAULT > > IPMI interface: SMIC > > BMC driver device: > > BMC I/O base address: CA9 > > Register space: 1 > > > > BT device default values: > > > > SSIF device default values: > > IPMI Version: 1.5 > > IPMI locate driver: DEFAULT > > IPMI interface: SSIF > > BMC driver device: /dev/i2c-0 > > BMC SMBUS slave address: 42 > > Register space: 1 > > > > ============================================================================ =========================== > > > > >ipmi-raw -D ssif --driver-device /dev/i2c-0 0 6 1 > > > > rcvd: 01 00 20 81 02 40 51 9F 22 03 00 11 43 > > > > ============================================================================ =========================== > > > > > > > > >bmc-info -D ssif --driver-device /dev/i2c-0 --driver-address 0x42 > > > > Device ID: 20 > > Device Revision: 1 > > [SDR Support] > > Firmware Revision: 2.64 > > [Device Available (normal operation)] > > IPMI Version: 1.5 > > Additional Device Support: > > [Sensor Device] > > [SDR Repository Device] > > [SEL Device] > > [FRU Inventory Device] > > [IPMB Event Receiver] > > [Chassis Device] > > Manufacturer ID: 322h > > Product ID: 4311h > > Aux Firmware Revision Info: 0h > > Channel Information: > > Channel No: 1 > > Medium Type: 802.3 LAN > > Protocol Type: IPMB-1.0 > > Channel No: 2 > > Medium Type: System Interface (KCS, SMIC, or BT) > > Protocol Type: IPMI-SMBus > > ============================================================================ =========================== > > > > > > > > > > > > > > > > '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' ''''''''''''''''''''''''' > > Ulrich Schäfer > > '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''''''''''' > > _______________________________________________ > > Freeipmi-users mailing list > > [email protected] > > http://lists.gnu.org/mailman/listinfo/freeipmi-users > > > -- > Albert Chu > [EMAIL PROTECTED] > 925-422-5311 > Computer Scientist > High Performance Systems Division > Lawrence Livermore National Laboratory > _______________________________________________ Freeipmi-users mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-users
