On Jan 22, 2008 2:47 PM, Chris Morgan <[EMAIL PROTECTED]> wrote: > On Jan 22, 2008 2:24 PM, Al Chu <[EMAIL PROTECTED]> wrote: > > Hey Chris, > > > > It looks like you can communicate w/ the BMC now, which is good. So we > > need to figure out why the the SSIF driver is not working by default. > > That's bug #1. I have a few ideas about it, hopefully I can deal with > > that later. > > > > > [EMAIL PROTECTED]:~# ipmimonitoring --no-probing -D SSIF > > > --driver-address=0x42 --driver-device=/dev/i2c-0 > > > --register-spacing=1 > > > ipmi_monitoring_sensor_readings_by_record_id: internal error > > > > This a more major concern. Could you run w/ --debug and see if there is > > any extra info it outputs. > > > > Hello again Al. > > [EMAIL PROTECTED]:~# ipmimonitoring --no-probing -D SSIF > --driver-address=0x42 --driver-device=/dev/i2c-0 --register-spacing=1 > --debug > ipmi-udm.c: 627: ipmi_open_inband: errnum (9): expression failed > (ipmi_monitoring_ipmi_communication.c, _inband_init, 176): ipmi_cmd: > device not found > ipmi-udm.c: 808: ipmi_close_device: errnum (15): expression failed > > ipmi_monitoring_sensor_readings_by_record_id: internal error > > Chris >
Please ignore this. I forgot to load i2c-dev, i2c-core and i2c-i810. Here is more valid output: [EMAIL PROTECTED]:~# ipmimonitoring --no-probing -D SSIF --driver-address=0x42 --driver-device=/dev/i2c-0 --register-spacing=1 --debug ================================================================ [ VALUE TAG NAME:LENGTH ] ================================================================ [ 20h] = cmd[ 8b] ================================================================ ================================================================ [ VALUE TAG NAME:LENGTH ] ================================================================ [ 0h] = cmd[ 8b] [ 0h] = comp_code[ 8b] [ 0h] = sdr_version_major[ 4b] [ 0h] = sdr_version_minor[ 4b] [ 0h] = record_count[16b] [ 0h] = free_space[16b] [ 0h] = most_recent_addition_timestamp[32b] [ 0h] = most_recent_erase_timestamp[32b] [ 0h] = get_sdr_repository_allocation_info_command_supported[ 1b] [ 0h] = reserve_sdr_repository_command_supported[ 1b] [ 0h] = partial_add_sdr_command_supported[ 1b] [ 0h] = delete_sdr_command_supported[ 1b] [ 0h] = reserved[ 1b] [ 0h] = modal_non_modal_sdr_repository_update_operation_supported[ 2b] [ 0h] = overflow_flag[ 1b] ================================================================ (ipmi_monitoring_sdr_cache.c, _ipmi_monitoring_sdr_cache_retrieve, 493): ipmi_sdr_cache_create: invalid parmaeters ipmi_monitoring_sensor_readings_by_record_id: internal error Chris _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-users