Hey Ihara, On Mon, 2008-05-26 at 01:24 +0900, Shuichi Ihara wrote: > Hi Al, > > >> Here is a write paper of X4150/X4450. > >> http://www.sun.com/servers/x64/x4150/wp.pdf > > > > I'll add this. > > Thanks. > > > > >> One question: > >> If we have a cluster and that consists of Intel and AMD servers, how > >> we can use "two" > >> workaround word for each servers in /etc/ipmipower.conf? > > > > Dealing with heterogenous clusters with multiple non-compliant IPMI > > implementations wasn't something I had in mind early on :-) But I > > know its a problem that I already have on my todo list. I wrote about > > it here: > > > > http://lists.gnu.org/archive/html/freeipmi-users/2008-03/msg00000.html > > OK. If it's possible, one configuration file would be better, but I just > wanted > to use the powerman with freeipmi. The current freeipmi supports "--config" > option. > So, that's useful and we can use two configuration files to be > /etc/powerman/powerman.conf. > > e.g) a[01-04]s, i[01-04]s are service processor's (ILOM, eLOM) address for > each nodes > > /etc/ipmipower_ilom.conf (for AMD servers, configured "endianseq" as > workaround) > /etc/ipmipower_elom.conf (for Intel servers, configured "authcap") > > /etc/powerman/powerman.conf > include "/etc/powerman/ipmipower.dev" > device "pow0" "ipmipower" "/usr/sbin/ipmipower -h a[01-04]s --config > /etc/ipmipower_ilom.conf |&" > node "a[01-04]" "pow0" "a[01-04]s" > > device "pow1" "ipmipower" "/usr/sbin/ipmipower -h i[01-04]s --config > /etc/ipmipower_elom.conf |&" > node "i[01-04]" "pow1" "i[01-04]s" > > MK your comments.
I think you got it. This is pretty much the way I would have expected someone to deal with this in powerman. Al > > > >> BTW, ipmi-fru still failing and can't dump all of fru information. It > > seems different issue. > >> # ipmi-fru -h 10.173.69.39 -u root -p changeme -W "authcap" > >> -snip- > >> FRU Get FRU Inventory Area Failure: bad completion code: request > > data/parameter invalid > >> FRU Get FRU Inventory Area Failure: bad completion code: request > > data/parameter invalid > >> -snip- > >> > >> Please see attached dump file with "--debug" option. > > > > I'll take a look (will probably not get to this one till next week > > though.) > > Thanks, I will make sure that you mentioned in another email about same > testing with > ipmitool to elom. I will update you soon. > > Thanks again, > > -Ihara -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-users
