Hi Stephen, Could you please try the "discretereading" workaround (i.e. -W discretereading). There's a description of the issue in the manpage about the issue and it's only been seen on HP systems. I believe HP has acknowledged the issue, but due to legacy reasons I don't believe they want to change it.
If that doesn't work, please send the --debug output. Al On Thu, 2013-03-14 at 16:55 -0700, Stephen Abbene wrote: > Hello, > > > > Today I installed freeipmi 1.2.5 on several HP gen7 and Gen8 servers and > have noticed that all the systems are missing the RPM from the fans and the > power meter information. Is there a way I can obtain this information? I > can provide the output from --debug or any other information you may need. > > > > Here are some of the specs of one of the systems I am testing, I can provide > more information if it is required. > > . HP Proliant DL160 G8 > > . CentOS 5.7 > > . 2x Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz > > . 1x Power Supply (detected) > > . 8x fans (detected) > > > > I have included the output of ` ipmi-sensors --entity-sensor-names` and > `bmc-info` from a HP dl160 Gen8 below. > > > > # ipmi-sensors --entity-sensor-names > > ID | Name | Type | Reading > | Units | Event > > 0 | System Chassis 1 UID Light | OEM Reserved | N/A | N/A | > 'OEM Event = 0000h' > > 1 | System Chassis 2 Health LED | OEM Reserved | N/A | N/A | > 'OEM Event = 0000h' > > 2 | Power Supply 1 Power Supply 1 | Power Supply | N/A | N/A > | 'Presence detected' > > 3 | System Board 1 Fan 1 | Fan | N/A > | N/A | N/A > > 4 | System Board 2 Fan 2 | Fan | N/A > | N/A | 'transition to Running' > > 5 | System Board 3 Fan 3 | Fan | N/A > | N/A | 'transition to Running' > > 6 | System Board 4 Fan 4 | Fan | N/A > | N/A | 'transition to Running' > > 7 | System Board 5 Fan 5 | Fan | N/A > | N/A | 'transition to Running' > > 8 | System Board 6 Fan 6 | Fan | N/A > | N/A | 'transition to Running' > > 9 | System Board 7 Fan 7 | Fan | N/A > | N/A | 'transition to Running' > > 10 | System Board 8 Fan 8 | Fan | N/A > | N/A | 'transition to Running' > > 11 | System Board 9 Fans | Fan | N/A > | N/A | 'Fully Redundant' > > 13 | Air Inlet 01-Inlet Ambient | Temperature | 25.00 > | C | 'OK' > > 14 | Processor 1 02-CPU 1 | Temperature | 40.00 > | C | 'OK' > > 15 | Processor 2 03-CPU 2 | Temperature | 40.00 > | C | 'OK' > > 16 | Memory Device 1 04-P1 DIMM 1-6 | Temperature | 38.00 > | C | 'OK' > > 17 | Memory Device 2 05-P1 DIMM 7-12 | Temperature | 39.00 > | C | 'OK' > > 18 | Memory Device 3 06-P2 DIMM 1-6 | Temperature | 34.00 > | C | 'OK' > > 19 | Memory Device 4 07-P2 DIMM 7-12 | Temperature | 29.00 > | C | 'OK' > > 20 | Memory Device 5 08-P1 Mem Zone | Temperature | 38.00 > | C | 'OK' > > 21 | Memory Device 6 09-P1 Mem Zone | Temperature | 38.00 > | C | 'OK' > > 22 | Memory Device 7 10-P1 Mem Zone | Temperature | 39.00 > | C | 'OK' > > 23 | Memory Device 8 11-P1 Mem Zone | Temperature | 42.00 > | C | 'OK' > > 24 | Memory Device 9 12-P1 Mem Zone | Temperature | 40.00 > | C | 'OK' > > 25 | Memory Device 10 13-P1 Mem Zone | Temperature | 39.00 > | C | 'OK' > > 26 | Memory Device 11 14-P2 Mem Zone | Temperature | 36.00 > | C | 'OK' > > 27 | Memory Device 12 15-P2 Mem Zone | Temperature | 35.00 > | C | 'OK' > > 28 | Memory Device 13 16-P2 Mem Zone | Temperature | 34.00 > | C | 'OK' > > 29 | Memory Device 14 17-P2 Mem Zone | Temperature | 33.00 > | C | 'OK' > > 30 | Memory Device 15 18-P2 Mem Zone | Temperature | 31.00 > | C | 'OK' > > 31 | Memory Device 16 19-P2 Mem Zone | Temperature | 30.00 > | C | 'OK' > > 32 | Disk 20-HD Max | > Temperature | N/A | C | N/A > > 33 | System Board 1 21-Chipset | Temperature | 46.00 > | C | 'OK' > > 34 | Power Supply 2 22-P/S | Temperature | 32.00 > | C | 'OK' > > 35 | Power Unit 1 23-VR P1 | Temperature | 43.00 > | C | 'OK' > > 36 | Power Unit 2 24-VR P2 | Temperature | 28.00 > | C | 'OK' > > 37 | Power Unit 3 25-VR P1 Zone | Temperature | 45.00 > | C | 'OK' > > 38 | Power Unit 4 26-VR P1 Mem | Temperature | 40.00 > | C | 'OK' > > 39 | Power Unit 5 27-VR P1 Mem | Temperature | 38.00 > | C | 'OK' > > 40 | Power Unit 6 28-VR P2 Mem | > Temperature | 30.00 | C | 'OK' > > 41 | Power Unit 7 29-VR P2 Mem | > Temperature | 28.00 | C | 'OK' > > 42 | Battery 30-Supercap Max | > Temperature | N/A | C | N/A > > 43 | System Management Module 31-iLO Zone | Temperature | 35.00 > | C | 'OK' > > 44 | System Board 2 32-LOM | > Temperature | N/A | C | N/A > > 45 | Add-in Card 1 33-PCI 1 | Temperature | N/A > | C | N/A > > 46 | Add-in Card 2 34-PCI 2 | Temperature | N/A > | C | N/A > > 47 | System Internal Expansion Board 1 35-PCI 1 Zone | Temperature | 33.00 > | C | 'OK' > > 48 | System Internal Expansion Board 2 36-PCI 2 Zone | Temperature | 33.00 > | C | 'OK' > > 49 | Add-in Card 3 37-LOM Card | Temperature | N/A > | C | N/A > > 50 | System Board 3 38-System Board | Temperature | 26.00 > | C | 'OK' > > 51 | Back Panel Board 39-Sys Exhaust | Temperature | 40.00 > | C | 'OK' > > 52 | System Board 10 Power Meter | Current | N/A > | N/A | 'Device Enabled' > > 53 | System Board 11 Memory | Memory | N/A > | N/A | 'Presence detected' > > > # bmc-info > > Device ID : 19 > > Device Revision : 1 > > Device SDRs : unsupported > > Firmware Revision : 1.10 > > Device Available : yes (normal operation) > > IPMI Version : 2.0 > > Sensor Device : supported > > SDR Repository Device : supported > > SEL Device : supported > > FRU Inventory Device : supported > > IPMB Event Receiver : unsupported > > IPMB Event Generator : unsupported > > Bridge : unsupported > > Chassis Device : supported > > Manufacturer ID : Hewlett-Packard (11) > > Product ID : 8192 > > > > Channel Information > > > > Channel Number : 0 > > Medium Type : IPMB (I2C) > > Protocol Type : IPMB-1.0 > > Active Session Count : 0 > > Session Support : session-less > > Vendor ID : Intelligent Platform Management Interface forum (7154) > > > > Channel Number : 2 > > Medium Type : 802.3 LAN > > Protocol Type : IPMB-1.0 > > Active Session Count : 0 > > Session Support : multi-session > > Vendor ID : Intelligent Platform Management Interface forum (7154) > > > > Channel Number : 7 > > Medium Type : OEM > > Protocol Type : KCS > > Active Session Count : 0 > > Session Support : session-less > > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Thanks, > --Stephen Abbene > > _______________________________________________ > Freeipmi-users mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/freeipmi-users -- Albert Chu [email protected] Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-users
