On Fri, 2014-04-11 at 02:21 +0200, ashka wrote: > Hi, > > I'm having some trouble with FreeIPMI, when I run ipmi-sensors a list of > sensors is returned with its state, this list can be found below. > The issue I am having is that nothing says that a RAM module might be > defective, but if I go on the KVM interface, I might find this info in > its log, something along the lines of "Uncorrectable DIMM error was > asserted on C0". > How can I either get the state in the list, or the log of the IPMI board > ? My server is a Dell Poweredge C1100.
I believe the log you're referring to is the system event log, or SEL. It can be output via the ipmi-sel tool. Al > > Sensor list: > > ID | Name | Type | Reading | Units | > > Event > > 2 | P5V | Voltage | 5.02 | V | 'OK' > > 3 | P1V8_AUX | Voltage | 1.80 | V | 'OK' > > 4 | P12V | Voltage | 12.22 | V | 'OK' > > 5 | MB Temp | Temperature | 44.00 | C | 'OK' > > 6 | FP Temp | Temperature | 23.00 | C | 'OK' > > 7 | BP Temp | Temperature | 24.00 | C | 'OK' > > 8 | CPU0 Temp | Temperature | 78.00 | C | 'OK' > > 9 | CPU1 Temp | Temperature | 75.00 | C | 'OK' > > 10 | DIMM Temp | Temperature | 66.00 | C | 'OK' > > 12 | Power Unit | Power Unit | N/A | N/A | 'OK' > > 13 | PSU Redundancy | Power Supply | N/A | N/A | N/A > > 15 | Critical IRQ | Critical Interrupt | N/A | N/A | 'OK' > > 18 | System FAN6_1 | Fan | 4200.00 | RPM | 'OK' > > 19 | System FAN6_2 | Fan | 4600.00 | RPM | 'OK' > > 20 | System FAN5_1 | Fan | 4300.00 | RPM | 'OK' > > 21 | System FAN5_2 | Fan | 4700.00 | RPM | 'OK' > > 22 | System FAN4_1 | Fan | 4200.00 | RPM | 'OK' > > 23 | System FAN4_2 | Fan | 5000.00 | RPM | 'OK' > > 24 | System FAN3_1 | Fan | 4400.00 | RPM | 'OK' > > 25 | System FAN3_2 | Fan | 4800.00 | RPM | 'OK' > > 26 | System FAN2_1 | Fan | 4500.00 | RPM | 'OK' > > 27 | System FAN2_2 | Fan | 4500.00 | RPM | 'OK' > > 28 | System FAN1 | Fan | 6400.00 | RPM | 'OK' > > 29 | P1V5_ICH | Voltage | 1.51 | V | 'OK' > > 30 | P3V3 | Voltage | 3.31 | V | 'OK' > > 31 | P3V3_STBY | Voltage | 3.31 | V | 'OK' > > 32 | PROCESSOR1 | Processor | N/A | N/A | > > 'Processor Presence detected' > > 33 | PROCESSOR0 | Processor | N/A | N/A | > > 'Processor Presence detected' > > 34 | IOH_THERMTRIP | Temperature | N/A | N/A | 'OK' > > 35 | PROC_HOT0 | Temperature | N/A | N/A | 'OK' > > 36 | PROC_HOT1 | Temperature | N/A | N/A | 'OK' > > 37 | IOH Temp | Temperature | 59.00 | C | 'OK' > > 38 | BMC Watchdog | Watchdog 2 | N/A | N/A | 'OK' > > 39 | BMC SEL | Event Logging Disabled | N/A | N/A | N/A > > 40 | System Event | System Event | N/A | N/A | 'OK' > > 41 | Button | Button/Switch | N/A | N/A | 'OK' > > 42 | DIMM_A0 | Memory | N/A | N/A | N/A > > 43 | DIMM_A1 | Memory | N/A | N/A | N/A > > 44 | DIMM_A2 | Memory | N/A | N/A | N/A > > 45 | DIMM_B0 | Memory | N/A | N/A | N/A > > 46 | DIMM_B1 | Memory | N/A | N/A | N/A > > 47 | DIMM_B2 | Memory | N/A | N/A | N/A > > 48 | DIMM_C0 | Memory | N/A | N/A | N/A > > 49 | DIMM_C1 | Memory | N/A | N/A | N/A > > 50 | DIMM_C2 | Memory | N/A | N/A | N/A > > 51 | DIMM_D0 | Memory | N/A | N/A | N/A > > 52 | DIMM_D1 | Memory | N/A | N/A | N/A > > 53 | DIMM_D2 | Memory | N/A | N/A | N/A > > 54 | DIMM_E0 | Memory | N/A | N/A | N/A > > 55 | DIMM_E1 | Memory | N/A | N/A | N/A > > 56 | DIMM_E2 | Memory | N/A | N/A | N/A > > 57 | DIMM_F0 | Memory | N/A | N/A | N/A > > 58 | DIMM_F1 | Memory | N/A | N/A | N/A > > 59 | DIMM_F2 | Memory | N/A | N/A | N/A > > 61 | PCIE Error | Critical Interrupt | N/A | N/A | N/A > > 62 | QPI Error | Critical Interrupt | N/A | N/A | N/A > > 63 | Internal Error | System Firmware Progress | N/A | N/A | N/A > > 64 | POST Error | System Firmware Progress | N/A | N/A | N/A > > 65 | NM Capabilities | OEM Reserved | N/A | N/A | N/A > > 68 | Mirror Mode | Memory | N/A | N/A | N/A > > 69 | MRC Event | Memory | N/A | N/A | N/A > > 71 | PROC_IERR_STATUS | Processor | N/A | N/A | 'OK' > > 72 | Session Audit | Session Audit | N/A | N/A | 'OK' > > 74 | PS1 Status | Power Supply | N/A | N/A | N/A > > 75 | PS2 Status | Power Supply | N/A | N/A | N/A > > 76 | NMI | Critical Interrupt | N/A | N/A | N/A > > Thanks for any future answer. > > All the best > > _______________________________________________ > Freeipmi-users mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/freeipmi-users -- Albert Chu [email protected] Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-users
