bmc-config -v checkout ..... Section Serial_Channel EndSection # # Section Serial_Conf Comments # # In the Serial_Conf section, typical serial communication configuration is # setup. Most users will only be interested in IPMI over LAN, therefore this # section can generally be ignored. # Section Serial_Conf EndSection
Lan_Conf seems fine. How do i disable channel 0,6 and 7 Thanks. On Mon, Jan 23, 2017 at 2:29 PM, VJ <purplet...@gmail.com> wrote: > Device ID : 36 > Device Revision : 1 > Device SDRs : unsupported > Firmware Revision : 1.17 > Device Available : yes (normal operation) > IPMI Version : 2.0 > Sensor Device : supported > SDR Repository Device : supported > SEL Device : supported > FRU Inventory Device : supported > IPMB Event Receiver : supported > IPMB Event Generator : supported > Bridge : unsupported > Chassis Device : supported > Manufacturer ID : INVENTEC CORPORATION (6569) > Product ID : 54 > Auxiliary Firmware Revision Information : 00000000h > > GUID : 00000000-0000-0000-0000-000000000000 > > System Firmware Version : rsion1.0 > System Name : Manager > Primary Operating System Name : SE Server 1.0 > Operating System Name : > > Channel Information > > Channel Number : 0 > Medium Type : IPMB (I2C) > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum > (7154) > > Channel Number : 1 > Medium Type : 802.3 LAN > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : multi-session > Vendor ID : Intelligent Platform Management Interface forum > (7154) > > Channel Number : 6 > Medium Type : IPMB (I2C) > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum > (7154) > > Channel Number : 7 > Medium Type : System Interface (KCS, SMIC, or BT) > Protocol Type : KCS > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum > (7154) > > On Mon, Jan 23, 2017 at 1:30 PM, Albert Chu <ch...@llnl.gov> wrote: > >> Hi, >> >> What are the other channel numbers (could you show via the output of >> bmc-info)? >> >> Also, could you elaborate on your use case scenario? >> >> Thanks, >> >> Al >> >> On Mon, 2017-01-23 at 13:18 -0800, VJ wrote: >> > I only see >> > 1) Lan_Channel >> > 2) Serial_Channel >> > >> > >> > there are 16 channels and they are not displayed even with -v >> > >> > On Thu, Jan 19, 2017 at 11:51 AM, Albert Chu <ch...@llnl.gov> wrote: >> > Hi, >> > >> > Do you wish to disable a very specific channel number, so you >> > wish to be >> > able to enable/disable based on the input of a number? At the >> > moment >> > that isn't supported. Could you elaborate on your use case >> > scenario? >> > >> > Other channels are configurable in bmc-config if you specify >> > --verbose >> > when you checkout. If there are multiple lan channels you can >> > configure >> > both, other less common channels like serial are also output >> > for >> > configuration. >> > >> > Al >> > >> > On Thu, 2017-01-19 at 11:37 -0800, VJ wrote: >> > > Hi >> > > >> > > Can I disable a channel using bmc-config configuration ? >> > > I dont see the sections disabling or enabling other than lan >> > channel. >> > > I looked at bmc-config man page and it doesnt mention it. >> > > >> > > Thanks. >> > >> > > _______________________________________________ >> > > Freeipmi-users mailing list >> > > Freeipmi-users@gnu.org >> > > https://lists.gnu.org/mailman/listinfo/freeipmi-users >> > >> > -- >> > Albert Chu >> > ch...@llnl.gov >> > Computer Scientist >> > High Performance Systems Division >> > Lawrence Livermore National Laboratory >> > >> > >> > >> > >> > >> > >> > -- >> > ------------------------------------------------------------ >> --------------------------- >> > ** Believe in : Hardwork Science God** >> > ============================================ >> > >> >> -- >> Albert Chu >> ch...@llnl.gov >> Computer Scientist >> High Performance Systems Division >> Lawrence Livermore National Laboratory >> >> >> > > > -- > ------------------------------------------------------------ > --------------------------- > ** Believe in : Hardwork Science God** > ============================================ > -- --------------------------------------------------------------------------------------- ** Believe in : Hardwork Science God** ============================================ _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org https://lists.gnu.org/mailman/listinfo/freeipmi-users
