Hello, I am having a couple of sensors on a Lenovo 650 server where the state is not interpreted by freeipmi.
I use the following command: ipmi-sensors -h 1.2.3.4 -u yyy -p xxx --entity-sensor-names -l USER -D LAN_2_0 -r 124 --output-sensor-state ID | Name | Type | State | Reading | Units | Event 124 | Group Drive Mismatch | Drive Slot | N/A | N/A | N/A | 'transition to OK' I tried to address the State N/A with the following settings in freeipmi_interpret_sensor.conf: IPMI_OEM_Value 19046:1087 0x07 0x0D 0x0000 Nominal I tried different values for the event bitmask and also IPMI_OEM_Bitmask without success. The Sensor state couldn’t be interpreted by the tool. Can anyone may please help me what I have to add to the freeipmi_interpret_sensor.conf to get the sensor state interpreted. Any help to solve this issue is much appreciated. Here are some details. Please let me know in case more info is needed. Sensor details: Record ID: 124 Record Type: Compact Sensor Record (2h) ID String: Drive Mismatch Sensor Type: Drive Slot (Dh) Sensor Number: 124 IPMB Slave Address: 10h Sensor Owner ID: 20h Sensor Owner LUN: 0h Channel Number: 0h Entity ID: Group (37) Entity Instance: 4 Entity Instance Type: Logical Container Entity Event/Reading Type Code: 7h Sensor Direction: Unspecified Assertion Event Enabled: 'transition to Critical from less severe' Deassertion Event Enabled: 'transition to Critical from less severe' Share Count: 0 ID String Instance Modifier Type: Numeric ID String Instance Modifier Offset: 0 Entity Instance Sharing: Same for all records Sensor State: N/A Sensor Event: 'transition to OK' Board details: Device ID : 32 Device Revision : 0 Device SDRs : unsupported Firmware Revision : 2.10 Device Available : yes (normal operation) IPMI Version : 2.0 Sensor Device : supported SDR Repository Device : supported SEL Device : supported FRU Inventory Device : supported IPMB Event Receiver : supported IPMB Event Generator : supported Bridge : unsupported Chassis Device : supported Manufacturer ID : Lenovo Group (19046) Product ID : 1087 Device GUID : 1f635e0a-d37e-5bbd-11e8-a54a47832434 System GUID : 1f635e0a-d37e-5bbd-11e8-a54a47832434 Michael FRANK Supervisor Global Monitoring Architecture Faurecia Clean Mobility T +49 821 4103 420 ● M +49 171 9967 206 michael.fr...@faurecia.com Faurecia Emissions Control Technologies, Germany GmbH - Biberbachstraße 9 – 86154 Augsburg – Germany Sitz der Gesellschaft: Augsburg - Registergericht Augsburg HR B 20757 Geschäftsführer: Mathias Miedrich, Françoise Crenn, Thomas Hanak Vorsitzender des Aufsichtsrats: Christophe Schmitt This electronic transmission (and any attachments thereto) is intended solely for the use of the addressee(s). It may contain confidential or legally privileged information. If you are not the intended recipient of this message, you must delete it immediately and notify the sender. Any unauthorized use or disclosure of this message is strictly prohibited. Faurecia does not guarantee the integrity of this transmission and shall therefore never be liable if the message is altered or falsified nor for any virus, interception or damage to your system. _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org https://lists.gnu.org/mailman/listinfo/freeipmi-users
