> Am I correct that " Firmware Revision : 1.90" is the FW of the BMC and
Correct > "IPMI Version : 2.0" means that the BC speaks only 'LAN_2_0'? It should support LAN or LAN_2_0, since all 2.0 motherboards should be backwards compatible to 1.5. However, there are some motherboards that fail to do the backwards compatibility. Al On Thu, Jul 4, 2019 at 10:57 AM FRANK Michael <michael.fr...@faurecia.com> wrote: > > Hello Albert, > > Thank you for your reply. > Am I correct that " Firmware Revision : 1.90" is the FW of the BMC and > "IPMI Version : 2.0" means that the BC speaks only 'LAN_2_0'? > > Device ID : 32 > Device Revision : 0 > Device SDRs : unsupported > Firmware Revision : 1.90 > Device Available : yes (normal operation) > IPMI Version : 2.0 > Sensor Device : supported > SDR Repository Device : supported > SEL Device : supported > FRU Inventory Device : supported > IPMB Event Receiver : supported > IPMB Event Generator : supported > Bridge : unsupported > Chassis Device : supported > Manufacturer ID : Lenovo Group (19046) > Product ID : 1087 > > GUID : cfb6540a-d37e-9b92-e811-74376f4b4774 > > System Firmware Version : > System Name : xxxx. > Primary Operating System Name : > Channel Information > > Channel Number : 0 > Medium Type : IPMB (I2C) > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Channel Number : 1 > Medium Type : 802.3 LAN > Protocol Type : IPMB-1.0 > Active Session Count : 1 > Session Support : multi-session > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Channel Number : 2 > Medium Type : Asynch. Serial/Modem (RS-232) > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : single-session > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Channel Number : 3 > Medium Type : System Interface (KCS, SMIC, or BT) > Protocol Type : KCS > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Channel Number : 4 > Medium Type : System Interface (KCS, SMIC, or BT) > Protocol Type : KCS > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum (7154) > > -----Original Message----- > From: achudr...@gmail.com <achudr...@gmail.com> On Behalf Of Albert Chu > Sent: Thursday, July 4, 2019 3:23 PM > To: FRANK Michael <michael.fr...@faurecia.com> > Cc: freeipmi-users@gnu.org > Subject: Re: [Freeipmi-users] Get BMC firmware version with freeipmi > > Hi Michael, > > Yes, you can use the bmc-info command. > > Al > > On Tue, Jul 2, 2019 at 6:43 AM FRANK Michael <michael.fr...@faurecia.com> > wrote: > > > > Hello, > > > > Is it possible to find out with freeipmi which firmware version the BMC is > > running. > > Would be interesting to monitor if the servers having the recommended > > software installed on their BMCs. > > > > Thanks for any feedback. > > > > Michael > > > > This electronic transmission (and any attachments thereto) is intended > > solely for the use of the addressee(s). It may contain confidential or > > legally privileged information. If you are not the intended recipient of > > this message, you must delete it immediately and notify the sender. Any > > unauthorized use or disclosure of this message is strictly prohibited. > > Faurecia does not guarantee the integrity of this transmission and shall > > therefore never be liable if the message is altered or falsified nor for > > any virus, interception or damage to your system. > > > > > > _______________________________________________ > > Freeipmi-users mailing list > > Freeipmi-users@gnu.org > > https://lists.gnu.org/mailman/listinfo/freeipmi-users > > This electronic transmission (and any attachments thereto) is intended solely > for the use of the addressee(s). It may contain confidential or legally > privileged information. If you are not the intended recipient of this > message, you must delete it immediately and notify the sender. Any > unauthorized use or disclosure of this message is strictly prohibited. > Faurecia does not guarantee the integrity of this transmission and shall > therefore never be liable if the message is altered or falsified nor for any > virus, interception or damage to your system. _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org https://lists.gnu.org/mailman/listinfo/freeipmi-users
