Hi Thomas, Ahhh, so what you're saying is FreeIPMI gets the error and doesn't continue to output additional FRU information?
There is a expected error code for when information from the motherboard isn't available (I can't remember that expected code at the moment), so I guess your motherboard isn't reporting that error code. Let me work up a workaround for you to try and I'll e-mail you with a branch path. Al On Mon, 2019-11-18 at 15:27 +0000, Thomas Perschak wrote: > Hi Albert, > > thx for your support. > > It's not that it does not read the FRU, the ipmi-fru command reads > the chassis, mainboard and some other data, but then it stops with > the error. > Here below what the other tools do: > > The ipmiutil fru command returns with an error (after some correct > output): > ... > [Baseboard,20,00] System GUID : 44457349-141b-6eb2-4094- > c20224ea2049 > Can't find SMBIOS address entry point. > > > The ipmitool fru command reports a device not present, but no error: > ... > FRU Device Description : PSU STD (ID 4) > Device not present (Command response could not be provided) > > > > Regards > Thomas > > > From: Albert Chu <ch...@llnl.gov> > Sent: 15 November 2019 18:15 > To: Thomas Perschak <tombert.gr...@live.at>; freeipmi-users@gnu.org < > freeipmi-users@gnu.org> > Subject: Re: [Freeipmi-users] Internal IPMI error > > Hi Thomas, > > Hmmm. The CEh error code corresponds to "Command response could not > be > provided". So it's possible your motherboard doesn't provide this > functionality? It would be strange for a modern system to not > provide > basic FRU functionality, so it's possible there's a more fundamental > issue. Perhaps the firmware is bad? > > Another possibility is that the firmware has a bug that it doesn't > recognize the Read FRU Data Request format. Does any other IPMI > software read the FRU correctly? > > Al > > On Fri, 2019-11-15 at 10:14 +0000, Thomas Perschak wrote: > > Hi IPMI users, > > > > I got an internal error on the following server: > > > > Fujitsu Primergy RX1330, Ubuntu 18, ipmi-fru 1.4.11 > > > > ===================================================== > > Read FRU Data Response > > ===================================================== > > [ 11h] = cmd[ 8b] > > [ CEh] = comp_code[ 8b] > > ipmi_fru_open_device_id: internal IPMI error > > > > > > How can I support to fix this issue? > > > > thx! > > _______________________________________________ > > Freeipmi-users mailing list > > Freeipmi-users@gnu.org > > https://lists.gnu.org/mailman/listinfo/freeipmi-users _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org https://lists.gnu.org/mailman/listinfo/freeipmi-users