I'm having a weird issue with radwho, when I run it, I get:
[root@local] []: radwho
radwho in free(): warning: junk pointer, too low to make sense.
the radutmp and radwtmp both have information in them, I can cat either and
see the data, if I do a last -f /var/log/radwtmp I get the proper output.
is this a configuration issue? also, I'm not having any luck with
Simultaneous-Use := 1 either, not sure if this is related to the previous
issue. I've got checkrad in place I've got the NAS type set to cvx in the
naslist. I'm running a tcpdump and I'm not seeing any snmp traffic from the
radius server, so I know it's not running checkrad.
here's a sample of my default entry in the users file. I have specific user
options set in there as well and those options are working, so I know it's
working properly.
DEFAULT Simultaneous-Use := 1, Auth-Type := System
Service-Type := Framed-User,
Framed-Protocol := PPP,
Framed-MTU := 1500,
Idle-Timeout := 1200,
Session-Timeout := 28800
PS: I'm working with a nortel CVX 1800.
Thanks,
Pat St.John
Technical Operations Manager
Inficad Communications
1.602.265.4423 ext 140
1.888.265.4423 ext 140
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
