turns out I found another way around the whole simultaneous use issue, the
CVX nas supports a reply called Port-Limit the documentation states that
this is ignored or has been disabled, but it looks like the firmware in the
NAS was updated and it is now supported. thanks for the help though.
Thanks,
Pat St.John
Technical Operations Manager
Inficad Communications
1.602.265.4423 ext 140
1.888.265.4423 ext 140
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, August 13, 2001 1:30 PM
To: [EMAIL PROTECTED]
Subject: Re: problems with radwho and freeradius 0.2/Simultaneous-Use
"pat st.john" <[EMAIL PROTECTED]> wrote:
> ok, after some more research, it looks like the problem I'm having is that
> my users log in with Pusername,
> the hints file strips the prefix off, and authenticates the user withthe
> stripped username, but the radutmp file still shows the Pusername as the
> logged in user, which I think is why the checkrad script is never run.
Hmm... I would expect, then, that the Stripped-User-Name attribute
is the one which should go into the radutmp file.
However, the Stripped-User-Name may strip out the realm, too. In
which case you've got a problem, if multiple users at different realms
have the same user ID's.
I'm not sure how best to fix this problem. Anyone else?
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
