Hi
I tried to authenticate PPTP VPN's with a Cisco PIX as tunnelendpoint to a freeradius 0.2. It works fine aslong as i use PAP or CHAP as Password Authentication on the client side. But when i try MS-CHAP, the radiusd gives me the followin output
can anybody help me, because without MS-CHAP I cannot use MPPE encryption with PPTP. The NAS is a Cisco PIX 520 with OS Release 5.1.4, and the Client is WINNT 4.0 SP6a
Simon
rad_recv: Access-Request packet from host 10.16.1.49:1645, id=29, length=126
User-Name = "test"
NAS-IP-Address = 10.16.1.49
MS-CHAP-Challenge = 0x3b9c6fe242642ebc
MS-CHAP-Response = 0x0101ba38e1dedad2a71aa9d6f6b39234d1427dcafffe143ffae
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 5
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "suffix" returns ok
users: Matched uad318 at 48
modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
rad_check_password: Found auth-type Local
auth: No password in the request
auth: Failed to validate the user.
Sending Access-Reject of id 29 to 10.16.1.49:1645
Finished request 0
Going to the next request
Genossenschaft Migros Aare
Simon Stoll
Informatik Telekommunikation
Industriestrasse 20
CH-3321 Sch�nb�hl
