Anyone have any ideas here? I'm still stumped, no matter what I try. Tried auth'ing from a users file, bypassing SQL, no dice. I'm compiling a uni-processor kernel now to see if it's something with SMP.
I'm open to any ideas. > -----Original Message----- > From: Jason Lixfeld [mailto:[EMAIL PROTECTED]] > Sent: October 25, 2001 12:12 PM > To: '[EMAIL PROTECTED]' > Subject: RE: Problems starting radiusd > > > I'm not using hints at all, actually. Nor am I using a users > file. User information is coming from MySQL. > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] On Behalf Of > > Andreas Faust > > Sent: October 25, 2001 12:09 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Problems starting radiusd > > > > > > On Thu, Oct 25, 2001 at 11:13:13AM -0400, Jason Lixfeld wrote: > > > Gdb radiusd was useless. > > > > > > Attached is strace output. > > check your hints or your users file.. > > have a close look at the packet, it has the same values over > > and over written into it again .... I would guess it loops > > somewhere. I think that FallThrough may be a problem in here ... > > > > please check that > > > > cheers medic > > > > > ***** RECIEVE AUTH PACKET HERE ***** > > > > > > ) = 1 (in [9]) > > > recvfrom(9, "\1\2\0001 1004021946\1\vtestuser1\2"..., > > 1600, 0, {sin_family=AF_INET, sin_port=htons(3243), > > sin_addr=inet_addr("216.7.221.25")}}, [16]) = 49 > > > time(NULL) = 1004022581 > > > kill(1351, SIGRT_0) = 0 > > > time(NULL) = 1004022581 > > > Password = "#testuser11" > > > Framed-Compression = Van-Jacobson-TCP-IP > > > Framed-Compression = Van-Jacobson-TCP-IP > > > Framed-Protocol = PPP > > > Framed-Compression = Van-Jacobson-TCP-IP > > > Framed-Protocol = PPP > > > Service-Type = Framed-User > > > Framed-Compression = Van-Jacobson-TCP-IP > > > Framed-Protocol = PPP > > > Service-Type = Framed-User > > > Auth-Type = Local > > > Framed-Compression = Van-Jacobson-TCP-IP > > > Framed-Protocol = PPP > > > Service-Type = Framed-User > > > Auth-Type = Local > > > Framed-MTU = 1500 > > > radiusd: Starting - reading configuration files ... > > > > > > ***** DEAD. CPU HITS 100% ***** > > > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
