try using
cisco-avpair += "ip:dns-servers=10.131.112.4 10.131.112.5",
cisco-avpair += "ip:wins-servers=10.131.112.11",
/tan
On Fri, 26 Oct 2001, Toth Zoltan wrote:
>
> Hi
>
> I setting up two avpair in users file but only one (first setting) sending
> to NAS.
> Why?
>
>
> users file -------------------------------
>
> DEFAULT Framed-Protocol == PPP
> Framed-IP-Netmask =255.255.255.0,
> cisco-avpair = "ip:dns-servers=10.131.112.4 10.131.112.5",
> cisco-avpair = "ip:wins-servers=10.131.112.11",
> Framed-Protocol = PPP,
> Framed-Compression = Van-Jacobson-TCP-IP
>
> radius debug-----------------------------
>
> Sending Access-Accept of id 91 to 10.131.251.3:1645
> Service-Type = Framed-User
> Framed-Protocol = PPP
> Framed-IP-Address = 10.131.200.33
> Framed-IP-Netmask = 255.255.255.0
> Framed-MTU = 576
> Cisco-AVPair = "ip:dns-servers=10.131.112.4 10.131.112.5"
> Framed-Compression = Van-Jacobson-TCP-IP
> Finished request 1
> Going to the next request
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
