thanks, decided to go with
DEFAULT Suffix="@visp"
Cisco-AVPair = "ip:addr-pool=visp",
NAS-Port-Type = Async,
Port-Limit = 1,
Fall-Through=1
On Wed, 21 Nov 2001, Kostas Kalevras wrote:
> code : Access-Request
> NAS-Port = 60
> NAS-Port-Type = Async
>
>
> ISDN calls:
>
> code : Access-Request
> NAS-Port = 20123
> NAS-Port-Type = ISDN-Sync
>
>
> Why not try adding the following in the users file:
>
> DEFAULT Realm == "domain", NAS-Port-Type == "ISDN-Sync", Auth-Type := Reject
> Reply-Message = "You are only allowed to connect through a modem"
>
> --
> kkalev
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-*-
/cj
chief janitor (Tree d'P)
internet solutions - infrastructure http://www.is.co.za
tel: +27-11-283-5000 v@x: +27-11-388-1092
#include <std-disclaimer.h>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
