My understand of this is its the max trying to get its config from Radius. Its quite normal, but you should only see it once the NAS has booted or you do a config reload.
- Simon > > Hello, > > I get strange things from my MAX1800. Using freeradius daemon with > > radiusd -f -s -x -y > > I get the following messages: > > ---------------------------------------------------------------------------- > ----------------------------------------- > Sending Access-Reject of id 52 to 10.0.250.250:1025 > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=53, > length=84 > User-Name = "permconn-cheseaux-1" > Password = "\306=\243\275Q\372\245\367QT\3153\302\377\252\244" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 53 to 10.0.250.250:1025 > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=54, > length=81 > User-Name = "dovbs-cheseaux-1" > Password = "#-\033n\275\362\254\376\216\021\275\232of+$" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 54 to 10.0.250.250:1025 > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=55, > length=83 > User-Name = "frdlink-cheseaux-1" > Password = "&!\037\3717\033\254\353\274\226\233NxO3I" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 55 to 10.0.250.250:1025 > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=50, > length=71 > User-Name = "banner" > Password = "RM\327\336\207\342\373\246\3410\313bA9|\020" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 50 to 10.0.250.250:1025 > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=51, > length=82 > User-Name = "bridge-cheseaux-1" > Password = "\300\036\026\314\302U\316\024Z\3226\353\346\326Y\330" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 51 to 10.0.250.250:1025 > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=52, > length=81 > User-Name = "route-cheseaux-1" > Password = "\272\003\243\252\306\202~\370\302H\312\2433\244\021\273" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 52 to 10.0.250.250:1025 > rad_recv: Accounting-Request packet from host 10.0.250.250:1042, id=138, > length=50 > Received Accounting-Request packet from 10.0.250.250 with invalid signature! > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=53, > length=84 > User-Name = "permconn-cheseaux-1" > Password = "\306=\243\275Q\372\245\367QT\3153\302\377\252\244" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 53 to 10.0.250.250:1025 > rad_recv: Accounting-Request packet from host 10.0.250.250:1042, id=139, > length=50 > Received Accounting-Request packet from 10.0.250.250 with invalid signature! > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=54, > length=81 > User-Name = "dovbs-cheseaux-1" > Password = "#-\033n\275\362\254\376\216\021\275\232of+$" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 54 to 10.0.250.250:1025 > rad_recv: Accounting-Request packet from host 10.0.250.250:1042, id=140, > length=50 > Received Accounting-Request packet from 10.0.250.250 with invalid signature! > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=55, > length=83 > User-Name = "frdlink-cheseaux-1" > Password = "&!\037\3717\033\254\353\274\226\233NxO3I" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 55 to 10.0.250.250:1025 > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=50, > length=71 > User-Name = "banner" > Password = "RM\327\336\207\342\373\246\3410\313bA9|\020" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 50 to 10.0.250.250:1025 > rad_recv: Access-Request packet from host 10.0.250.250:1025, id=51, > length=82 > User-Name = "bridge-cheseaux-1" > Password = "\300\036\026\314\302U\316\024Z\3226\353\346\326Y\330" > NAS-IP-Address = 10.0.250.250 > NAS-Port = 0 > NAS-Port-Type = Virtual > Service-Type = Outbound-User > Sending Access-Reject of id 51 to 10.0.250.250:1025 > ---------------------------------------------------------------------------- > ----------------------------------------- > > 'cheseaux' is the name of the NAS (actually a MAX1800). > The SecretKey is correct, otherwise I would receive messages about bat > authenticated packets. > I get multiple routes and outbound users defined in the users file. > Theses messages appear 3-10 times per second! > > I think it's a problem with the MAX (out of order, ...) > > Does anybody has an idea? Do you agree with the fact that the MAX is out of > order? What may I check? > > Thank you > > Christophe Marbacher > > Simon Allard (Senior Tool Monkey) IHUG Ph (09) 358-5067 Email: [EMAIL PROTECTED] "Eagles may soar, but weasels don't get sucked into jet engines." - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
