UPDATE:
Sorry for annoying everyone again..not seeing much traffic.
The issue is that strip-user-name in the hints file for the realms seems
to leave the realm delimiter behind, thereby only matching the user name
if it has the delimiter appended/prepended to it.
I installed the latest snapshot and there was no difference. Is this a
feature,config issue or a bug?
Is there a regex I could use to work around this?
Anybody else run into this?
-------- Original Message --------
Subject: Strip-User-Name leaves delimiter behind
Date: Sun, 09 Dec 2001 15:00:58 -0500
From: Joe Maimon <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Hi all,
My apologies, new to lists and very new to radius.
Freeradius - 0.3
Here is my hints:
DEFAULT Prefix = "chl.com" , Strip-User-Name = Yes
Hint = CHL
DEFAULT Prefix = "chl", strip-user-name = yes
Hint = CHL
DEFAULT Suffix = "chl.com", Strip-User-Name = yes
Hint = CHL
DEFAULT Suffix = chl, Strip-User-Name = no
Hint = CHL
This is my users:
DEFAULT Hint == "CHL"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-IP-Netmask = 255.255.255.255,
Idle-Timeout = 600,
Session-Timeout = 28800,
Port-Limit = 1,
Fall-Through = Yes
joe@ Auth-Type := "Local" , Password := "test"
/usr/local/sbin/radiusd -xx -s -y
radtest [EMAIL PROTECTED] test localhost 1 testing123
radtest joe@chl test localhost 1 testing123
radtest chl/joe test localhost 1 testing123
Server output attached:
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
read_config_files: reading dictionary
read_config_files: reading clients
read_config_files: reading realms
read_config_files: reading naslist
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_auth = yes
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd.pid"
main: user = "root"
main: group = "root"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: dead_time = 120
main: debug_level = 0
read_config_files: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded System
unix: cache = no
unix: passwd = "/etc/passwd"
unix: shadow = "(null)"
unix: group = "/etc/group"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
Module: Instantiated unix (unix)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded detail
detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail"
detail: detailperm = 384
detail: dirperm = 493
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on
1814/udp.
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:1380, id=42,
length=60
User-Name = "[EMAIL PROTECTED]"
Password = "\237\254\002\363\332\277\343[\356\206"s\260\253)\352"
NAS-IP-Address = 255.255.255.255
NAS-Port-Id = "1"
modcall: entering group authorize
hints: Matched DEFAULT at 69
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "suffix" returns ok
users: Matched DEFAULT at 1
users: Matched joe@ at 12
modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
rad_check_password: Found Auth-Type Local
auth: type Local
auth: user supplied Password matches local Password
Login OK: [joe@] (from nas local port 0)
Sending Access-Accept of id 42 to 127.0.0.1:1380
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 255.255.255.254
Framed-IP-Netmask = 255.255.255.255
Idle-Timeout = 600
Session-Timeout = 28800
Port-Limit = 1
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 42 with timestamp 3c13cfc7
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:1380, id=46,
length=56
User-Name = "joe@chl"
Password = "\373\225\210Zar\204\234\356\267\303\257\314\201\2238"
NAS-IP-Address = 255.255.255.255
NAS-Port-Id = "1"
modcall: entering group authorize
hints: Matched DEFAULT at 72
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "suffix" returns ok
users: Matched DEFAULT at 1
modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
auth: No Auth-Type configuration for the request, rejecting the user
auth: Failed to validate the user.
Login incorrect: [joe@chl] (from nas local port 0)
Sending Access-Reject of id 46 to 127.0.0.1:1380
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 46 with timestamp 3c13cfcf
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:1380, id=50,
length=56
User-Name = "chl/joe"
Password = "\010\374\331\322\027\262\360\341\021w\322\201\2208\371\333"
NAS-IP-Address = 255.255.255.255
NAS-Port-Id = "1"
modcall: entering group authorize
hints: Matched DEFAULT at 66
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "suffix" returns ok
users: Matched DEFAULT at 1
modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
auth: No Auth-Type configuration for the request, rejecting the user
auth: Failed to validate the user.
Login incorrect: [/joe] (from nas local port 0)
Sending Access-Reject of id 50 to 127.0.0.1:1380
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
MASTER: exit on signal (2)
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
