Ahh, that makes sense. Thanks again! It works great now.
One "last" question (I hope). :)
I'm using Ascend-Data-Filters and for some reason only one of the
Attributes is being sent in the reply.
Sending Access-Accept of id 234 to 1.2.3.4:1026
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
Framed-MTU = 1500
Idle-Timeout = 1800
Session-Timeout = 28800
Ascend-Idle-Limit = 1800
Ascend-Maximum-Time = 28800
Ascend-Data-Filter = "ip input forward tcp"
I know that in Cistron enable to use the Ascend Filters I had to comment
out some lines in the source that checked for duplicate attributes. Is
the solution the same here? If so, which lines, in which file?
Thanks a ton!!
Darren
On Sat, 12 Jan 2002 [EMAIL PROTECTED] wrote:
> Darren Nay <[EMAIL PROTECTED]> wrote:
> > I've now got the server configured, but I'm having a problem
> > authenticating users. I keep getting a "No Password configured for the
> > user" error.
>
> Yes, you're using Auth-Type := Local, which means a locally supplied
> plain-text password. Since the DEFAULT examples you posted didn't
> have a password, the authentication fails.
>
> Instead, you've got to use Auth-Type := Accept. Then, in your
> Exec-Program-Wait script, return 0 for OK, and 1 for authentication
> failure. The server will send an Access-Reject on authentication
> failure.
>
> Alan DeKok.
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
