Hi,
that's bad.
it means there is something not quite right in the code.
/tan
On Mon, 28 Jan 2002, Marcelo Ferreira wrote:
> Hi Tan,
>
>
> I'm running FR with the -s option and the problem disappear..
>
> []s
>
> ------------------------------------------------------------
> Marcelo Ferreira
> Canbras TVA Cabo Ltda
> Canbras Acesso - STA
> Phone: +5511-4993-8728
> ------------------------------------------------------------
>
> ----- Original Message -----
> From: "Tan Hwee Hong" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, January 27, 2002 1:56 AM
> Subject: Re: Thread issue
>
>
> > Hi Alan,
> >
> > I have encourtered similiar crashes.
> > below is a crash dump and is reproducible. normally when that happens, the
> > logfile will produce the following:
> >
> > Error: Received Accounting-Response packet from 192.168.2.21 with invalid
> > signature!
> > (note: secret was set correctly)
> >
> > here's the setup:
> >
> > OS: RedHat 7.1
> > Freeradius version: cvs dated Jan 26 2002
> >
> > 192.168.2.10+
> > 192.168.2.11 ---> 192.168.2.20 ---> 192.168.2.21
> >
> > 2 clients were used to generate the acct packets to feed the radius server
> > which in turn proxied the request to another server.
> >
> >
> > config for proxy.conf
> > realm testdomain.com {
> > type = radius
> > authhost = 192.168.2.21:1812
> > accthost = 192.168.2.21:1813
> > secret = secret
> > nostrip
> > }
> >
> >
> > eg:
> > ./bin/radclient -q -f account-pkt 192.168.2.20:1813 acct secret
> >
> > account-pkt was generated with the following:
> >
> > i=0;
> > while [ $i -lt 20000 ]; do
> > (
> > echo "User-Name = \"tst$[EMAIL PROTECTED]\""
> > echo "NAS-Identifier = \"TESTING\""
> > echo "Service-Type = Framed-User"
> > echo "Framed-Protocol = PPP"
> > echo "NAS-Port = 999$i"
> > echo "Acct-Session-Id = \"$i-FFFF\""
> > echo "Acct-Authentic = RADIUS"
> > echo "Acct-Status-Type = Stop"
> > echo "Session-Timeout = 22000"
> > echo "Framed-IP-Address = 192.168.2.1"
> > echo "Acct-Input-Octets = 212"
> > echo "Acct-Output-Octets = 14332"
> > echo "Acct-Input-Packets = 10"
> > echo "Acct-Output-Packets = 141"
> > echo "Acct-Session-Time = 254"
> > echo ""
> > )
> > i=`expr $i + 1`;
> > done
> >
> > $ gdb sbin/radiusd core
> >
> > GNU gdb Red Hat Linux (5.1-0.71)
> > Copyright 2001 Free Software Foundation, Inc.
> > GDB is free software, covered by the GNU General Public License, and you
> are
> > welcome to change it and/or distribute copies of it under certain
> conditions.
> > Type "show copying" to see the conditions.
> > There is absolutely no warranty for GDB. Type "show warranty" for
> details.
> > This GDB was configured as "i386-redhat-linux"...
> > Core was generated by `sbin/radiusd'.
> > Program terminated with signal 11, Segmentation fault.
> > Reading symbols from /lib/libnsl.so.1...done.
> > Loaded symbols for /lib/libnsl.so.1
> > Reading symbols from /lib/libresolv.so.2...done.
> > Loaded symbols for /lib/libresolv.so.2
> > Reading symbols from /lib/libpthread.so.0...done.
> >
> > warning: Unable to set global thread event mask: generic error
> > [New Thread 1024 (LWP 8641)]
> > Error while reading shared library symbols:
> > Can't attach LWP 8641: No such process
> > Reading symbols from /lib/libcrypt.so.1...done.
> > Loaded symbols for /lib/libcrypt.so.1
> > Reading symbols from /usr/lib/libltdl.so.0...done.
> > Loaded symbols for /usr/lib/libltdl.so.0
> > Reading symbols from /lib/libc.so.6...done.
> > Loaded symbols for /lib/libc.so.6
> > Reading symbols from /lib/libdl.so.2...done.
> > Loaded symbols for /lib/libdl.so.2
> > Reading symbols from /lib/ld-linux.so.2...done.
> > Loaded symbols for /lib/ld-linux.so.2
> > Reading symbols from /lib/libnss_files.so.2...done.
> > Loaded symbols for /lib/libnss_files.so.2
> > Reading symbols from /lib/libnss_dns.so.2...done.
> > Loaded symbols for /lib/libnss_dns.so.2
> > Reading symbols from /usr/freeradius/lib/rlm_unix.so.0...done.
> > Loaded symbols for /usr/freeradius/lib/rlm_unix.so.0
> > Reading symbols from /usr/freeradius/lib/rlm_preprocess.so.0...done.
> > Loaded symbols for /usr/freeradius/lib/rlm_preprocess.so.0
> > Reading symbols from /usr/freeradius/lib/rlm_realm.so.0...done.
> > Loaded symbols for /usr/freeradius/lib/rlm_realm.so.0
> > Reading symbols from /usr/freeradius/lib/rlm_files.so.0...done.
> > Loaded symbols for /usr/freeradius/lib/rlm_files.so.0
> > Reading symbols from /usr/freeradius/lib/rlm_detail.so.0...done.
> > Loaded symbols for /usr/freeradius/lib/rlm_detail.so.0
> > #0 0x40173292 in __libc_sendto () from /lib/libc.so.6
> > (gdb) bt
> > #0 0x40173292 in __libc_sendto () from /lib/libc.so.6
> > #1 0x4004f38e in sendto (fd=6, buf=0x40203ae0, n=144, flags=0, addr=
> > {__sockaddr__ = 0xbf7ff9dc, __sockaddr_at__ = 0xbf7ff9dc,
> __sockaddr_ax25__ = 0xbf7ff9dc, __sockaddr_dl__ = 0xbf7ff9dc,
> __sockaddr_eon__ = 0xbf7ff9dc, __sockaddr_in__ = 0xbf7ff9dc,
> __sockaddr_in6__ = 0xbf7ff9dc, __sockaddr_inarp__ = 0xbf7ff9dc,
> __sockaddr_ipx__ = 0xbf7ff9dc, __sockaddr_iso__ = 0xbf7ff9dc,
> __sockaddr_ns__ = 0xbf7ff9dc, __sockaddr_un__ = 0xbf7ff9dc, __sockaddr_x25__
> = 0xbf7ff9dc}, addr_len=16)
> > at wrapsyscall.c:222
> > #2 0x080591fc in rad_send (packet=0x40203958, original=0x0,
> > secret=0x80b4368 "secret") at radius.c:522
> > #3 0x08050a18 in proxy_send (request=0x40201b90) at proxy.c:307
> > #4 0x0804d83c in rad_respond (request=0x40201b90, fun=0x804f36c
> <rad_accounting>)
> > at radiusd.c:1527
> > #5 0x0805671c in request_handler_thread (arg=0x80bc420) at threads.c:169
> > #6 0x40049f87 in pthread_start_thread (arg=0xbf7ffc00) at manager.c:284
> > (gdb)
> >
> >
> > let me know if you need more info.
> >
> > regards,
> > Tan
> >
> >
> >
> >
> >
> > On Fri, 25 Jan 2002, [EMAIL PROTECTED] wrote:
> >
> > > "Marcelo Ferreira" <[EMAIL PROTECTED]> wrote:
> > > > I got this error message this morning at a production test:
> > > >
> > > >
> > > > #0 0x401eea01 in __kill () from /lib/i686/libc.so.6
> > > > #1 0x400645bb in raise (sig=6) at signals.c:65
> > > > #2 0x401eff82 in abort () at ../sysdeps/generic/abort.c:88
> > > > #3 0x0804db55 in rad_respond (request=0x8122848, fun=0x804f90c
> > > > <rad_accounting>) at radiusd.c:1423
> > >
> > > Ouch. That's a definite bug.
> > >
> > > > Is there any bug at thread or pthread API's at RedHat Linux 7.2 or at
> > > > Freeradius?
> > >
> > > It's an assertion in FreeRADIUS, that everything's OK.
> > >
> > > Since it dies, that means it found some internal inconsistency
> > > problem, and didn't know what else to do, but kill itself.
> > >
> > >
> > > What else are you doing? While I admit it's a bug in the server, if
> > > no one else is seeing the problem, that means that your local
> > > configuration must have something unique which makes it trigger the
> > > bug.
> > >
> > > Alan DeKok.
> > >
> > > -
> > > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> > >
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> >
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
