On Sat, 9 Mar 2002, Peter Santiago wrote:
> the following commands does not execute properly...
>
> 1. Check server doesn't return any results...
general_radiusd_base_dir should contain the base directory of the freeradius
installation *not* the radiusd binary. The way you 've edited admin.conf will
make the radclient path look like this:
/usr/sbin/radiusd/bin/radclient which does not seem correct. Only if
dialup_admin can access radclient can the 'check server' and 'test user' pages
work properly.
> 2. Edit users on the left side menu doesn't retrieve userinfo, when the
> input box is filled the username. One has to enter the user name again in
> the main window then click on show user, before the userinfo comes out....
Just put the username in the input box and press enter. :-)
> general_base_dir: /var/www/html/dialup_admin
> general_radiusd_base_dir: /usr/sbin/radiusd
> general_domain: psinergybbs.com
> #
> general_snmpfinger_bin: %{general_base_dir}/bin/snmpfinger
> general_radclient_bin: %{general_radiusd_base_dir}/bin/radclient
> #
--
Kostas Kalevras Network Operations Center
[EMAIL PROTECTED] National Technical University of Athens, Greece
Work Phone: +30 10 7721861
'Go back to the shadow' Gandalf
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
