Hi radius-interested,
I've installed freeradius 0.4 under linux and radius is working well.
1) Is it possible to limit the the amount of ip-addresses given out by the
radius server? So can I limit the amount of addresses?
e.g. only 200 addresses should be give out from 10.252.172.0/24.
2) When I do the following configuration in the users-file, I have the
problem when a differnet NAS sends the request for the same user the
same ip-address is given out:
user1 Auth-Type := Local, NAS-IP-Address == 10.0.0.1, Password == "test"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 10.252.172.0+,
Framed-IP-Netmask = 255.255.255.0,
Framed-MTU = 1500
user1 Auth-Type := Local, NAS-IP-Address == 10.0.0.2, Password == "test"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 10.252.172.0+,
Framed-IP-Netmask = 255.255.255.0,
Framed-MTU = 1500
How could I get around that problem?
Is it possible, when defining two NAS in the clients.conf-file, e.g.
client 10.0.0.1 {
secret = Test
shortname = nas1
}
client 10.0.0.2 {
secret = Test
shortname = nas1
}
that there is a possibility to refer to the shortname in the users-file?
Thanks & best regards,
Marcus.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
