>
> I think you're confused as to how RADIUS works.
I think you might be confused as to what I need.....
> - There will NEVER be a 'Acct-Session-Id' in an authentiction packet
Please see debug below, on all stages of the call the Acct-Session-Id =
"00000660" is clear...All I wanna do is use this to disconnect the call
>
> - If you know in the authentication packet that you want to disconnect
> the user, you just send an Access-Reject. You don't need to send
> a disconnect packet
I can't send an access reject it is too late in the training up process I
want to reject on the number dialed but after the call has been answered
by the NAS, I know this is non standard I want to know if there is a way
round doing this.
>
> - RADIUS doesn't do disconnect packets. See the FAQ.
>
Many Thanks
Stuart
radrecv: Packet from host 17.0.0.97 code=1, id=139, length=88
User-Name = "504343"
User-Password = "\367\234q\221\300s9\n\245\304\331\273\312\354\234"
NAS-Port = 20100
Called-Station-Id = "504343"
NAS-Port-Type = Async
Service-Type = Outbound-User
NAS-IP-Address = 17.0.0.97
Acct-Session-Id = "0000065D"
users: Matched 504343 at line 3
auth: Local
Sending Ack of id 139 to 17.0.0.97
Service-Type = Framed-User
Framed-Protocol = PPP
radrecv: Packet from host 17.0.0.97 code=1, id=140, length=96
User-Name = "ITOditg"
CHAP-Password =
"\001\313e\322\006\360=\244\377\343\254S\356\030\023\004r"
Called-Station-Id = "504343"
NAS-Port-Type = Async
NAS-Port = 40
NAS-Port = 40
Service-Type = Framed-User
NAS-IP-Address = 17.0.0.97
Acct-Session-Id = "00000660"
users: Matched ITOditg at line 7
auth: Local
Sending Ack of id 140 to 17.0.0.97
radrecv: Packet from host 17.0.0.97 code=4, id=48, length=111
Acct-Session-Id = "00000660"
Framed-Protocol = PPP
User-Name = "ITOditg"
Acct-Status-Type = Start
Called-Station-Id = "504343"
NAS-Port-Type = Async
NAS-Port = 40
NAS-Port = 40
Service-Type = Framed-User
NAS-IP-Address = 17.0.0.97
Ascend-Session-Svr-Key = "780FDABD"
Event-Timestamp (Unknown Type 3)
Acct-Delay-Time = 0
Sending Accounting Ack of id 48 to 17.0.0.97
radrecv: Packet from host 17.0.0.97 code=4, id=49, length=190
Acct-Session-Id = "00000660"
Framed-Protocol = PPP
Acct-Authentic = RADIUS
Framed-IP-Address = 17.0.1.1
Acct-Terminate-Cause = 0
Acct-Input-Octets = 8935
Acct-Output-Octets = 126
Acct-Input-Packets = 138
Acct-Output-Packets = 6
Acct-Session-Time = 2882
Connect-Info = "31200 V34+/LAPM (33600/31200)"
User-Name = "ITOditg"
Acct-Status-Type = Stop
Called-Station-Id = "504343"
NAS-Port-Type = Async
NAS-Port = 40
NAS-Port = 40
Service-Type = Framed-User
NAS-IP-Address = 17.0.0.97
Ascend-Session-Svr-Key = "780FDABD"
Event-Timestamp (Unknown Type 3)
Acct-Delay-Time = 0
Sending Accounting Ack of id 49 to 17.0.0.97
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
