Dear Daniel Yeung, Have you installed 0.5 on new box or updated previous FreeRADIUS version? You have to remove older version before installing 0.5
--Thursday, April 25, 2002, 7:46:57 AM, you wrote to [EMAIL PROTECTED]: DY> I have freebsd 4.3 , freeradius 0.5 (one proxy and one authentication) with thread enabled. DY> I comment out the unnecessary modules conf from radiusd.conf. DY> At the first test, three RAS boxes are configured to use RADIUS proxy server. DY> The cpu consumption of Radiusd process increase to 98% cpu time after 30 mins to 1 hour. DY> In top, the process is constantly "RUN". DY> At the second test, two RAS boxes are configured to use RADIUS proxy server. DY> The result is same. DY> At the third test, One RAS box is connected to the proxy server initially. DY> It still work fine after overnight. Then another RAS box is connected to this RADIUS proxy server. DY> The cpu consumption of Radiusd process increase to 98% cpu time after 2-3 hours. DY> In top, the process is constantly "RUN". DY> My conclusion is version 0.5 consumed more system resources. DY> But I haven't idean to it turn it. Please advise. DY> Daniel DY> - DY> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- ~/ZARAZA �� � ������, ������, ���������� ������������ ��� ������ �������. (����) - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
