I'm trying to get FreeRadius working with MySQL authentication and pretty
much have it going with one minor issue. When a ser who is not in my
authentication database tries to connect FreeRadius does not appear to send
back a rejection. It seems to not respond at all causing the client to
repeat the request and eventually timeout.
When I submit a valid request I get (passwords and secrets changed for
security)
-------------------------
echo "User-Name = testuser, User-Password = XXXXXXXX" | ./radclient
127.0.0.1 auth YYYYYY
Received response ID 71, code 2, length = 68
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 255.255.255.254
Framed-IP-Netmask = 255.255.255.255
Framed-Routing = None
Framed-MTU = 1500
Ascend-Idle-Limit = 1200
------------------
If I submit a request with an invalid user I get (passwords and secrets
changed for security)
---------------------------
echo "User-Name = testuser, User-Password = XXXBADPASSXXX" | ./radclient
127.0.0.1 auth YYYYYY
radclient: no response from server
--------------------------
running the server with
./radiusd -xxyz -l stdout
I see a section that comes back like
rlm_sql: User DEFAULT not found and DEFAULT not found
rlm_sql: Released sql socket id: 4
modcall[authorize]: module "sql" returns notfound
modcall[authorize]: module "suffix" returns ok
modcall: group authorize returns ok
auth: No Auth-Type configuration for the request, rejecting the user
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Do I have to have a DEFAULT user or DEFAULT group in my MySQL database?
It works fine if I only use the userfile for authentication.
Any help would be appreciated.
Thanks in advance
Kelvin
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
