Thanks for the reply Chris. I did actually try it this way was well. I did not see any difference other than the daemon did not complain as much in debugging mode. Two more questions. Is there a better (more elegant) method to accomplish this task besides huntgroups? If not, does the following syntax look appropriate or can I combine multiple elements within one huntgroup statement?
<-- revised sample users config--> bobjones Auth-Type := System, Huntgroup-Name == "core-routers", Huntgroup-Name == "border-routers" Thanks again! Regards, Brent -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chris Parker Sent: Monday, April 29, 2002 6:26 AM To: [EMAIL PROTECTED] Subject: Re: Limit users access to certain device groups At 01:24 PM 4/28/2002 -0700, B Bowers wrote: >Hello all, > >I want to limit access to different groups of devices to certain groups of >users. I thought I could accomplish this via huntgroups but it does not seem >to be working consistently as I would expect. Below is a conceptual >configuration of my 'users' and 'huntgroups' configuration files. Any help >or guidance would be greatly appreciated! > ><--sample users config--> >bobjones Auth-Type := System > Huntgroup-Name == "core-routers", > Huntgroup-Name == "border-routers" Check-items ( the huntgroup comparisons ) *must* all be placed on the first line. Reply-items belong on the lines below. -Chris -- \\\|||/// \ StarNet Inc. \ Chris Parker \ ~ ~ / \ WX *is* Wireless! \ Director, Engineering | @ @ | \ http://www.starnetwx.net \ (847) 963-0116 oOo---(_)---oOo--\------------------------------------------------------ \ Wholesale Internet Services - http://www.megapop.net - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
