|
hi, everyone:
who can explain the error I met.
I am puzzled by the errors when i am trying to
use
freeradius+oracle. I know you have much experience about it. Can you give me a favor? I am using Redhat7.2+oracle8.1.7 on the same computer and the process of installation is nothing wrong. The rlm_sql_oracle is compiled successfully. Then I configured the conf file(mainly radiusd.conf and sql.conf) and run it in debug mode. The rlm_sql_oracle module is loaded and linked normally. Then I use the db_oracle.sql file provided by the package to configure the oracle db. But I find that table dicitionary can not be created. Then I comment the section about table dictionary in db_oracle.sql file. And I add a column named op to tables(radcheck,radreply,radgroupcheck,radgroupreply) .As a result, db_oracle.sql is run normally. I don't know whether what i have done is right or not. i add a user(insert into radcheck values ('1','bob','Password','bob','==')); I add a record into table radreply(insert into radreply values('1','bob','Reply-Message','hi!!!!','='); then i use the test program to test my configuration. Error appeared in the output of debug. my radiusd.conf and debug output is shown in the end. #radiusd.conf configuration authorize { sql } authenticate { chap } preacct { # suffix # files # preprocess } accounting { sql } session { radutmp } # debug output Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no read_config_files: reading dictionary read_config_files: reading clients read_config_files: reading realms read_config_files: reading naslist main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd.pid" main: user = "root" main: group = "root" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: proxy_requests = no main: debug_level = 0 read_config_files: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded SQL sql: driver = "rlm_sql_oracle" sql: server = "localhost" sql: port = "" sql: login = "sys" sql: password = "change_on_install" sql: radius_db = "mydata" sql: acct_table = "radacct" sql: acct_table2 = "radacct" sql: authcheck_table = "radcheck" sql: authreply_table = "radreply" sql: groupcheck_table = "radgroupcheck" sql: groupreply_table = "radgroupreply" sql: usergroup_table = "usergroup" sql: nas_table = "nas" sql: dict_table = "dictionary" sql: sqltrace = no sql: sqltracefile = "/usr/local/var/log/radius/sqltrace.sql" sql: deletestalesessions = yes sql: num_sql_socks = 5 sql: sql_user_name = "%{User-Name}" sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" sql: authenticate_query = "SELECT Value,Attribute FROM radcheck WHERE UserName = '%{User-Name}' AND ( Attribute = 'User-Password' OR Attribute = 'Password' OR Attribute = 'Crypt-Password' ) ORDER BY Attribute DESC" sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}'" sql: accounting_start_query = "INSERT into radacct (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')" sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query_alt = "INSERT into radacct (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '0', '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')" sql: connect_failure_retry_delay = 60 rlm_sql: Driver rlm_sql_oracle loaded and linked rlm_sql: Attempting to connect to sys@localhost:/mydata rlm_sql: Connected new DB handle, #0 rlm_sql: Connected new DB handle, #1 rlm_sql: Connected new DB handle, #2 rlm_sql: Connected new DB handle, #3 rlm_sql: Connected new DB handle, #4 Module: Instantiated sql (sql) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) main: smux_password = "" main: snmp_write_access = no SMUX connect try 1 Can't connect to SNMP agent with SMUX: Connection refused Listening on IP address *, ports 1645/udp and 1646/udp. Ready to process requests. rad_recv: Access-Request packet from host 210.79.245.187:1060, id=30, length=43 User-Name = "bob" Password = "\016\205\312\342\200\367|\244$iL\243\273\227\2346" modcall: entering group authorize rlm_sql: Reserving sql socket id: 4 radius_xlat: 'bob' sql_escape in: 'bob' sql_escape out: 'bob' sql_set_user: escaped user --> 'bob' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'bob' ORDER BY id' rlm_sql_getvpdata: database query error rlm_sql: SQL query error; rejecting user rlm_sql: Released sql socket id: 4 modcall[authorize]: module "sql" returns invalid modcall: group authorize returns invalid Sending Access-Reject of id 30 to 210.79.245.187:1060 Finished request 0 Going to the next request SMUX connect try 2 Can't connect to SNMP agent with SMUX: Connection refused --- Walking the entire request list --- Waking up in 6 seconds... |
