At 11:27 AM 5/10/2002 -0400, Aamer Akhter wrote:
>Hello,
>
>I just make the newest freeradius with the default settings, and something
>seems to have changed. Under the old freeradius this was working fine.
What version are you upgrading from?
>Here is the output from -X:
>
>rad_recv: Access-Request packet from host 10.13.0.41:1645, id=109, length=79
> User-Name = "as"
> Password = "\331\257\\\025\337\025\341\036\n\367\016syc\374j"
> NAS-Port = 130
> NAS-Port-Type = Virtual
> Calling-Station-Id = "10.13.0.254"
> Service-Type = Login-User
> NAS-IP-Address = 3640-PE-EAST-1
>modcall: entering group authorize
> modcall[authorize]: module "preprocess" returns ok
> modcall[authorize]: module "suffix" returns ok
>Invalid operator for item : reverting to '=='
>Invalid operator for item : reverting to '=='
Those should be fixed.
> modcall[authorize]: module "files" returns notfound
>modcall: group authorize returns ok
>auth: No Auth-Type configuration for the request, rejecting the user
That's the problem. Module 'files' returned 'notfound', so it didn't
match the username for some reason.
>smartbits Auth-Type := Local
> Password == "xxx",
These should all be on one line.
>any ideas on what my next step should be?
Perhaps you could try putting a blank line between each of the one-line
user entries you have at the bottom of the users file?
-Chris
--
\\\|||/// \ StarNet Inc. \ Chris Parker
\ ~ ~ / \ WX *is* Wireless! \ Director, Engineering
| @ @ | \ http://www.starnetwx.net \ (847) 963-0116
oOo---(_)---oOo--\------------------------------------------------------
\ Wholesale Internet Services - http://www.megapop.net
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
