Hello All,
I have been running freeradius 0.3 on sid for quite sometime.
I recently upgraded to 0.4-1 and now when any user attempts to
authenticate I get a SEGV. Currently as a work arround I have
"Auth-Type: Accept" set on the "DEFAULT" user.
<snip>
Listening on IP address *, ports 1812/udp and 1813/udp.
Ready to process requests.
rad_recv: Access-Request packet from host 203.26.6.1:1647, id=231,
length=93
User-Name = "gcollins"
NAS-IP-Address = 203.26.6.13
NAS-Port = 50
NAS-Port-Type = Async
Called-Station-Id = "93503000"
Password = "{LVt\3169\216\211\311\334\t\261\357B\207\036"
Service-Type = Framed-User
Framed-Protocol = PPP
Proxy-State = 0x323133
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "suffix" returns ok
users: Matched DEFAULT at 1
modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
rad_check_password: Found Auth-Type System
auth: type "System"
modcall: entering group authenticate
Segmentation fault
</snip>
Basically my question is, are other people useing the .debs in sid?
I have tried to build .debs from the CVS tree but as yet I have
unmet buildreqs :(
Any help will be appreciated.
--
Tony
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
