Alan,
I find that the new CVS is not able to recognize the Group == "" in the
users file. The below is my users files content:
DEFAULT Simultaneous-Use := 1
Fall-Through = 1
DEFAULT Group == "plan60", RAD-Max-Session-Time := 60
Fall-Through = 1
#DEFAULT Group == "plan60", RAD-Session-Time == 60, Auth-Type :=
Reject
# Reply-Message = "You've used up more than 1 minute!"
#DEFAULT Group == "plan60", Auth-Type := Reject
# Reply-Message = "You've used up more than 1 minute!"
DEFAULT Auth-Type := System
Fall-Through = 1
If I use the version 0.5, I can see MATCH with line 1,4,13 from the debug
message:
users: Matched DEFAULT at 1
users: Matched DEFAULT at 4
users: Matched DEFAULT at 13
Can you help to check whether it is a bug? Thanks a lot!
Kenneth
On Fri, 24 May 2002, Alan DeKok wrote:
> Kenneth Lee <[EMAIL PROTECTED]> wrote:
> > rlm_counter: Entering module authorize code
> >
> > the output is stop at the above statement and the client is disconnect
> > after some time.
> >
> > I dont know whether can give you all some insight about the problem, I
> > find that the thread seems getting halt with you login after the second
> > time (becase I see that the total number of thread is increased by one
> > when I continue try logging in).
>
> OK, it looks like the counter module has issues. Try grabbing the
> CVS snapshot from tonight, I've made some changes which may fix the
> problem.
>
> Alan DeKok.
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
