At 06:09 AM 6/11/2002 -0700, Aqeel Anwar wrote:
>Hi all
>I am using freeradius 0.5 on solaris 7.0 with cisco
>servers. On server radius i defined two groups with
>group-names "disabled" and "single". then i created
>two users: test1 belonging to disabled and test2
>belonging to single. Then in users file I have:
>
>DEFAULT Group := "disabled", Auth-Type := Reject
> Reply-Message = "Not authorized"
>
>DEFAULT Group := "single", Auth-Type :=System,
>Framed-Protocol := PPP
> Framed-Protocol = PPP,
> Framed-Compression = Van-Jacobson-TCP-IP
>
>With this configuration, both users are matched on
>first group, so both are rejected authorization.
Yes. You are using the wrong operators. Please see the
'users' man page.
-Chris
--
\\\|||/// \ StarNet Inc. \ Chris Parker
\ ~ ~ / \ WX *is* Wireless! \ Director, Engineering
| @ @ | \ http://www.starnetwx.net \ (847) 963-0116
oOo---(_)---oOo--\------------------------------------------------------
\ Wholesale Internet Services - http://www.megapop.net
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
