I'm running a COR-1100 with 2 ROR-1000's .... Putting one of the radio's in the ROR to AP mode and one to ROR mode as a point-to-point slave. The interface that's in AP mode has radius authentication set on it. I don't see any settings for EAP. I haven't run freeradius in debug mode to see what's really happening. All I did was use the MAC address (formatted like: 00022d-ac2d5e) and the radius secret as the password.
I know my configuration is a little different ... I hope it helps. Charlie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Hayden Myers Sent: Thursday, June 20, 2002 3:03 PM To: [EMAIL PROTECTED] Subject: radius and orinoco RG-1100 I have flashed our orinoco RG-1100 to be an ap500 which supports radius. I'm running into the following problem where freeradius says there's no User-Password attribute. This stuff is pretty fresh to me so you can imagine I'm at a a loss. Currently I'm using a client from meetinghouse. I believe it's acalled aegis. the line in my users file looks like this hayden Auth-Type := EAP User-Password == "hayden" In my radiusd.conf I've made sure EAP is configured and is supposed to use MD5 for now. The messages I'm seeing from the radius 0.5 server are below. modcall: group authorize returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" auth: Failed to validate the user. Login incorrect: [hayden/<no User-Password attribute>] (from client orinoco_ap port 0 cli 00601d1fb406) Delaying request 0 for 1 seconds Finished request 0 Going to the next request Hayden Myers Support Manager Skyline Network Technologies [EMAIL PROTECTED] (410)583-1337 option 2 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
