On Fri, 12 Jul 2002, Emre Bastuz wrote:

> Hi,
>
> I´ve been trying to create a dialout profile with FreeRadius 0.5 and a Cisco
> AS5300. The Dialout User profile looks like this:
>
> tester-out   Password == "cisco", User-Service-Type == Outbound-User
>         Ascend-Send-Auth = Send-Auth-PAP,
>         Ascend-Dial-Number = "1234567",
>         Ascend-Send-Secret = "abc123",
>         Framed-IP-Address = 10.0.0.1,
>         Framed-IP-Netmask = 255.255.255.255

Here is the working profile we are using. Hope it helps:

Framed-Compression = Van-Jacobson-TCP-IP
Framed-MTU = 1500
Framed-IP-Netmask = 255.255.255.255
Framed-Protocol = PPP
Cisco-AVPair = "outbound:send-secret=xxxxxxx"
Service-Type = Outbound-User
Cisco-AVPair = "outbound:addr*123.123.123.123"
Cisco-AVPair = "outbound:dial-number=0486739672"


>
> The dialout succeeds physically but not on the authentication/authorization part
> (I guess). The debug from the NAS looks like this:
>
> 1d01h: RADIUS: Received from id 203 192.168.1.1:1812, Access-Accept, len 87
> 1d01h:         Attribute 26 12 00000211E7060000
> 1d01h:         Attribute 26 19 00000211E30D3032
> 1d01h:         Attribute 26 24 00000211D612657A
> 1d01h:         Attribute 8 6 D5A87D51
> 1d01h:         Attribute 9 6 FFFFFFFF
> 1d01h: RADIUS: saved authorization data for user 61420778 at 61262A64
> 1d01h: RADIUS: Bad attribute (unsupported or inapplicable attribute): type 8 len
> 6 data 0xD5A87D51
>
> When I remove the attributes "Framed-IP-Address" and "Framed-IP-Netmask" I don´t
> get the "Bad Attribute" error from the NAS but I need to set the IP address of
> the called peer somehow.
>
> Is "Framed-Address" not Valid with "User-Service-Type == Outbound-User" ?
>
> How can I set the peers´ IP Adress ?
>
> Is there also a way to specify which username the NAS should use to login to the
> remote peer after dialing ?

You set that in the Large Scale Dialout routes I think.See:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t3/lsdial.htm

>
> How can specifiy the PAP password to be used when loging into the remote end
> after callout ?
>
> I´ve been hitting my head on the wall over this for almost a day now, so any
> help will be greatly appreciated :)
>
> Regards,
>
> Emre
>
> P.S.: the other direction, i.e. the remote end calling the NAS works fine.
>
> --
> Emre Bastuz
> [EMAIL PROTECTED]              http://www.emre.de
> UIN: 561260           PGP Key ID: 0xAFAC77FD
>
> -------------------------------------------------
> This mail sent through IMP: http://horde.org/imp/
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>

--
Kostas Kalevras         Network Operations Center
[EMAIL PROTECTED]      National Technical University of Athens, Greece
Work Phone:             +30 10 7721861
'Go back to the shadow' Gandalf


- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to