Hernan Marcelo Salvarezza <[EMAIL PROTECTED]> wrote: > Hello all,i am trying to configure an as5300 to authenticate telnet > connections to my freeradius > but i keep getting authentication failed,i wanted to check out if > everything is ok..
Then run it in debugging mode, and read the results. > This is the debug output from the freeradius sever: > > > Sending Access-Reject of id 19 to 10.0.0.1:1645 --> I am using 1812 in > radiusd.conf So what heppened BEFORE this? > rad_recv: Accounting-Request packet from host 10.0.0.1:1646, id=20, > length=109 ... > Sending Accounting-Response of id 20 to 10.0.0.1:1646---> The problem > seems to be here.. This is accounting, which has nothing to do with authentication. The user was already rejected, so they can't log in. > I only have the 1812,1813 ports configured in the as5300,i tried to > configure 1845,1846 but > the results are the same..any ideas why the Response is being sent > trough the 1646 port > Sending Accounting-Response of id 20 to 10.0.0.1:1646---> The source port of the Accounting-Request packet from the NAS is not important. It can be anything, and I very much doubt that you can configure it. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
