Hi,
I've been trying to run the radius server in debug mode ( radiusd -xxyz -l stdout
); it isn't showing errors and when i try to connect, the server isn't seeing the
request.
I launch radtest : radtest my_user_name my_password radius_server_ip_address 10
client_secret (client_secret is the same as in the /etc/raddb/clients file). This
is the output:
Sending Access-Request of id 46 to radius_server_ip_address:1812
User-name = "my_user_name"
Password = "encrypt_pass"
NAS-IP-Address= radius_server_ip_address
NAS-Port-Id = "10"
radclient: no response from server.
I would like to add that ports 1645, 1812 and 1813 are there in /etc/services
file.
Is the freeradius 0.6's configuration different freeradius 0.5's configuration?
Because I really don't understand what's happen.
Thanks for your help
Cheers,
"Aaron T. Weiker" wrote:
> When you run it in debug mode are there any errors? Can you verify that
> the radius server is seeing the request.
>
> Aaron Weiker
>
> > -----Original Message-----
> > From: Bertrand TACHAGO [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, July 23, 2002 12:38 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: Need help
> >
> >
> > I'm running RH 7.2 with Freeradius version 0.6.
> > I succeeded to restart the Radius server but nobody is able
> > to connect; the
> > connexion failed just after the username and password
> > verification with the
> > following error: Error 629 you have been disconnected from
> > the computer you have
> > called, unable to start a distant connexion.
> > I added the following in the /etc/sysconfig/ipchains file in
> > order to open the
> > radius's ports i found in the /etc/services file:
> > - A input -s 0/0 1645 -d radius_server_ip_address 1645 -p
> > udp -i eth0 -j ACCEPT
> > - A input -s 0/0 1812 -d radius_server_ip_address 1812 -p
> > udp -i eth0 -j ACCEPT
> > - A input -s 0/0 1813 -d radius_server_ip_address 1813 -p
> > udp -i eth0 -j ACCEPT
> > Please, can anyone help me to solve this crucial probleme?
> > Thanks a lot in advance
> >
> > Ador Dauz wrote:
> >
> > > I hope all your ports is open, specially for the radius.
> > > Because you might forgot the port to open, and its block of
> > > your ipchains policies... thats only I guess.
> > >
> > > thank's
> > > --ador
> > >
> > > On Monday 22 July 2002 21:07, you wrote:
> > > > Hello,
> > > > I was using freeradius version 0.5 with Redhat Linux 7.1
> > and everythings
> > > >
> > > > were working properly. But since i upgraded the system to
> > Redhat Linux
> > > > 7.2, nothing is working: anyone is unable to connect.
> > Please can someone
> > > >
> > > > help me solve this problem?
> > > > Thanks in advance
> > >
> > > -
> > > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> > --
> > Bertrand
> > TACHAGO
> > Computer specialist, Network & Information Specialist
> > SDNP SchoolNet Cameroon (237)221 25 53
> > Yaounde Cameroon
> > My website: http://www.sdnp.cm/tachago/
> >
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Bertrand TACHAGO
Computer specialist, Network & Information Specialist
SDNP SchoolNet Cameroon (237)221 25 53
Yaounde Cameroon
My website: http://www.sdnp.cm/tachago/
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
