Cisco VSA & FreeRADIUS

[HOPP�L Felici�n]

Hello,   I've tested freeradius 0.6 and it works fine, I'm planning to replace my production radius now. I have only one problem, I'd like to log Cisco VSAs (like nas-rx-speed, nas-tx-speed) in SQL database. I have 50+ AS5350 an AS5400 with IOS 12.2 and it sends VSA accounting as Cisco-AVPair. Cisco-vsa-hack does not work with this. Any solution? This is a sample accounting-stop record:   Fri Jul 26 22:56:34 2002         NAS-IP-Address = xxx         NAS-Port = 670         Cisco-NAS-Port = "Async5/22*Serial2/6:2"         NAS-Port-Type = Async         User-Name = "xxx"         Called-Station-Id = "xxx"         Calling-Station-Id = "xxx"         Acct-Status-Type = Stop         Acct-Authentic = RADIUS         Service-Type = Framed-User         Acct-Session-Id = "0E000D11"         Framed-Protocol = PPP         Framed-IP-Address = xxx         Acct-Terminate-Cause = Lost-Carrier         Acct-Input-Octets = 3597499         Acct-Output-Octets = 36347730         Acct-Input-Packets = 55748         Acct-Output-Packets = 74657         Acct-Session-Time = 7280         Cisco-AVPair = "disc-cause-ext=1011"         Cisco-AVPair = "pre-bytes-in=123"         Cisco-AVPair = "pre-bytes-out=112"         Cisco-AVPair = "pre-paks-in=5"         Cisco-AVPair = "pre-paks-out=5"         Cisco-AVPair = "pre-session-time=25"         Cisco-AVPair = "connect-progress=60"         Cisco-AVPair = "nas-rx-speed=28800"         Cisco-AVPair = "nas-tx-speed=50000"         Acct-Delay-Time = 0         Client-IP-Address = xxx         Timestamp = 1027716994 Best Regards, Felician Hoppal