On Mon, 29 Jul 2002, Ador Dauz wrote:
> To all,
>
> Please need your help or other solutions.
>
> I using freeradius 0.6 and I used the rlm_ippool module.
> this is what I observed, Using my setup which it pool 10
> IP Address range, so I try to login 10 times and It gave
> me the right IP address range which in my configuration.
> After that, In my 11 attempt login, It gave an IP address
> out of the range specified in my configuration. �So to solve
> my problem, I need to stop the radiusd service then delete
> the db.ippool and db.ipindex files then restart the radiusd.
> Any help please to solve my problem...
>
> � � � ippool hangar {
> � � � � � � � � range-start = 172.16.10.50
> � � � � � � � � range-stop = �172.16.10.60
> � � � � � � � � netmask = 255.255.255.0
> � � � � � � � � cache-size = 10
> � � � � � � � � session-db = ${raddbdir}/db.ippool
> � � � � � � � � ip-index = ${raddbdir}/db.ipindex
I am not able to reproduce the problem. The ippool module will give out all the
available ip's in it's pool and after that it will not do anything. Could you
send some debuging info showing radiusd giving out a wrong IP?
--
Kostas Kalevras Network Operations Center
[EMAIL PROTECTED] National Technical University of Athens, Greece
Work Phone: +30 10 7721861
'Go back to the shadow' Gandalf
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
