On Thu, 22 Aug 2002, [iso-8859-1] ho k wrote: > Hi > > The connection is still failed after changing the > order in radiusd.conf and debug output as: > > DEFAULT NAS-IP-Address == 192.168.59.244, Auth-Type := > Accept, Pool-Name = "RAS" > Service-Type = Framed-User, > Framed-MTU = 1500, > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-Compression = Van-Jacobson-TCP-IP
Try changing Pool-Name = "RAS" to Pool-Name := "RAS" > > but there is no problem of the connection for change > the config to: > > DEFAULT Auth-Type := Accept > Service-Type = Framed-User, > Framed-IP-Address = 192.168.59.192+, > Framed-MTU = 1500, > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-Compression = Van-Jacobson-TCP-IP > > Another question that may it work for this entry in > "users" config: > DEFAULT NAS-IP-Address == 192.168.59.244, Auth-Type := > System, Pool-Name = "RAS_1" > Service-Type = Framed-User, > Framed-MTU = 1500, > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-Compression = Van-Jacobson-TCP-IP > > DEFAULT NAS-IP-Address == 192.168.59.245, Auth-Type := > System, Pool-Name = "RAS_2" > Service-Type = Framed-User, > Framed-MTU = 1500, > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-Compression = Van-Jacobson-TCP-IP > > when I have two RAS which ip 192.168.59.244 and > 192.168.59.255 are. They would assign separate ip > range to two group of dialup users > > k If you create two ippool instances named RAS_1 and RAS_2 you shouldn't have any problems. -- Kostas Kalevras Network Operations Center [EMAIL PROTECTED] National Technical University of Athens, Greece Work Phone: +30 10 7721861 'Go back to the shadow' Gandalf - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
