I agree
it sounds crazy!!
We will try thanks a lot
___
Gustavo A. Lozano
Noldata
CTO
I know not with what weapons World War III will be fought,
but World War IV will be fought with sticks and stones.
Albert Einstein
On Fri, 6 Sep 2002, Kostas Kalevras wrote:
> On Fri, 6 Sep 2002 [EMAIL PROTECTED] wrote:
>
> > What we want is to Assign the Pool from Ldap.
> > The cisco has 3 pools configured with 3 different names.
> >
> > We want radius to tell the cisco to assign the ip address from
> > determinated pool to the users.
> >
> >
> > Radius is authenticauting everything well and sending the String
> > CiscoAssigngIpPool as attributte 208, but the cisto says Authorization
> > failed.
> >
> > If we remove the attribute ciscoAssignIpPool then it works.
> >
> > Regards
> >
> > Gustavo
>
> We are using cisco av pair for the same job:
> Cisco-AVPair := "ip:addr-pool=dialin_pool"
>
> We had the same problem and we got the folowing really crazy solution from
> cisco:
>
> Remove Framed-IP-Address = 255.255.255.254 from the reply packet. So try
> removing the framed-ip-address attribute from your access-accept. Maybe this
> will solve your problem.
>
> --
> Kostas Kalevras Network Operations Center
> [EMAIL PROTECTED] National Technical University of Athens, Greece
> Work Phone: +30 10 7721861
> 'Go back to the shadow' Gandalf
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
