I have commented all the DEFAULT authtype examples in the file and this is the only entry in there myuser Auth-Type = Local, User-Password == "mypassword"
9/17/02 5:32 PM, "Artur Hecker" <[EMAIL PROTECTED]> wrote: > hi > > if i understood correctly, you use local authentication with eap, i.e. > by some file. can you please post the configuration of the concerned > user in the radius "users" file? > > >> When I try to authenticate through windows XP Local area connection popup >> dialog, it refuses authentication straight away. >> >> modcall: entering group authorize >> modcall[authorize]: module "preprocess" returns ok >> modcall[authorize]: module "eap" returns updated >> modcall[authorize]: module "files" returns notfound >> modcall: group authorize returns updated >> rad_check_password: Found Auth-Type EAP >> auth: type "EAP" >> modcall: entering group authenticate >> rlm_eap: Request found, released from the list >> rlm_eap: EAP_TYPE - md5 >> rlm_eap: processing type md5 >> >> rlm_eap_md5: No password configured for this user >> >> modcall[authenticate]: module "eap" returns invalid >> modcall: group authenticate returns invalid >> auth: Failed to validate the user. >> Sending Access-Reject of id 56 to 10.0.0.212:1812 >> EAP-Message = "\0048\000\004" >> Message-Authenticator = 0x00000000000000000000000000000000 >> Finished request 2 > > if we don't get this with the config, we'll have to sniff traffic. a > firmware update is always a good idea especially if it is older than > 12-16 monthes. > > > ciao > artur > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
